OPERATING MANAUAL(FOR ENGINEERS).pdf - 第113页
Page 5-17 TEACHING 5 T eaching the Chip Recognition 3Y3C-E-EMD05-A01-01 3 Select the chip name and press Change . 4 Check the chip data. 1. Chip size 2. Nozzle 3. REF No. 4. Camera Press Exten chip . Check the extension …
Page 5-16
Teaching the Chip Recognition
5-4-3 Before Teaching the Chip Recognition
Many recognition errors are due to a problem with chip data, but they can be rectified by correcting.
It can be thought that teaching the chip recognition is mainly used for checking chip data, as for
chip other than block matching recognition.
Although the chips with problems can be checked by teaching the chip recognition, check the
following items first.
a) Check that chip data in use is proper.
Operating procedure to checking chip data
Feeder layout
Stock data
3Y3C-E-EMD05-A01-00
1
Press
Data modify
.
2
Press .
To the next page
Page 5-17
TEACHING
5
Teaching the Chip Recognition
3Y3C-E-EMD05-A01-01
3
Select the chip name and press
Change .
4
Check the chip data.
1. Chip size
2. Nozzle
3. REF No.
4. Camera
Press Exten chip .
Check the extension chip data.
1. Pin pitch and data of number of pin
2. Missing pin data
5
6
Page 5-18
Teaching the Chip Recognition
b) Check that recognition rate for judgment value in the
machine parameter is proper.
Operating procedure to checking the
recognition rate
3Y3C-E-EMD05-A01-01
1
Press
Machine
parameter
.
2
Press Judgment value .
3
Check the recognition rate.
(normally around 85%)