OPERATING MANAUAL(FOR ENGINEERS).pdf - 第28页

Page 28 3Y3C-E-EMD00-A04-00 IDENTITY PLA TE AND CAUTION LABEL B.M/C Height sensor 01DNC0AA ∗ 1 CLASS1 LED MANUFACTURER : HOKUYO WAVE LENGTH : 800nm POWER : 0.5mW TYPE: VBA-P111R/D111R 4W3C-AN00

100%1 / 168
Page 27
3Y3C-E-EMD00-A04-00
IDENTITY PLATE AND CAUTION LABEL
CM88S-MU
Camera X-Y table
3P3C-PS063
07JFC2AA
4W3C-AI00
Board holder
15ULC0AA
Operator’s side reference:
Attached on inner side.
inner side reference:
Attached on operator’s side.
∗This is attached on the movable side of
conveyor frame.
∗2
∗2
DO NOT TOUCH
DO NOT MOVE THIS CONVEYOR MANUALLY.
CONVEYOR WIDTH WOULD BE CHANGED.
4W3C-AI00
4W3C-001E
CAUTION
Before changing fuse in
CCU. cut off power.
CCU camera
Page 28
3Y3C-E-EMD00-A04-00
IDENTITY PLATE AND CAUTION LABEL
B.M/C Height sensor
01DNC0AA
∗1
CLASS1 LED
MANUFACTURER : HOKUYO
WAVE LENGTH : 800nm
POWER : 0.5mW
TYPE: VBA-P111R/D111R
4W3C-AN00
Page 29
3Y3C-E-EMD00-A04-00
HANDLING FLOPPY DISK
Data and program for this machine, basically managed by PT100, are saved to
and loaded from a floppy disk. This section describes the protection and han-
dling of such floppy disks.
NOTICE
Only 3.5-inch 2DD floppy disks can be used for this machine. 2HD disks cannot be
used.
1 Backing up the Data and Program
A floppy disk is a compact and light weighted data storage medium convenient for storage and
transport, but data may be erased or may not be loaded by improper handling.
Make sure to back-up the program and data on a disk to protect against the loss of data. To back-
up the program and data, make another copy disk of the same contents.
∗ See the disk copy in the section of file operation for how to back up.
2 Write Protection
The stored data may be mechanically protected from accidental erasure or rewriting.
• Write protection may be set or disabled by sliding the write protect tab located at the lower part of
the floppy disk with a ball pen tip, etc.
Slide the tab with a ball point
pen tip or something similar.
The hole is open.
The hole is closed.
“Protected” position
Inhibits deleting or
saving
“Delete” position
Permits deleting
or saving
Write protect tab
Reverse side