OPERATING MANAUAL(FOR ENGINEERS).pdf - 第45页

Page 1-9 FUNCTIONS 1 Operation Mode of the Double Feeder Stage d) Joint mode Select this mode, when parts of more than 70 (CM88S-M1: 35) (Maximum of 140 (CM88S-M1:70)) are placed. Carry out the production after jointing …

100%1 / 168
Page 1-8
3Y3C-E-EMD01-A01-03
1-3 Operation Mode of the Double Feeder Stage
In order to flexibly respond to your various types of production, the CM88C provides the following 3
types of production mode. It is possible to exchange the feeder in all modes during running the
machine.
a) Exchange mode
This mode is effective when the parts for mounting is less than 70 types of component.
When the components on the B stage run out, production is automatically continued on the Astage.
Producing of A type
b) Priority exchange mode
This is effective when wishing to use one stage by priority in exchange mode.
When the specified stage is available, this stage is used by priority. (After the board being pro-
duced currently has been mounted, the stage is switched over automatically.
A Stage Priority Specified
∗ Set them at “Option configuration” in the machine parameters.
c) Spare mode
This mode is effective for the changeover (change of board to produce).
(But number of parts placed on the board is less than 70.)
Producing of A, B, and C types
A stageB stage B stage retracts. A stage moves.
Parts run out.
Supplying the part.
Production continues.
Machine is running.
B stage retracts. A stage moves.
A part is completed.
Feeder for B part
Production of B
type starts.
Supply the parts for
C type.
Machine is running.
3Y3C-006E
3Y3C-007E
Chips run out at Ast.
4G3C-003E
Production continues at Bst.
B stage moves.
A stage retracts.
B stage retracts.
A stage moves.
After a board has been mounted,
the pick-up stage is switched to the
A stage and production continues.
Chips are supplied.
A stageB stage
Page 1-9
FUNCTIONS
1
Operation Mode of the Double Feeder Stage
d) Joint mode
Select this mode, when parts of more than 70 (CM88S-M1: 35) (Maximum of 140 (CM88S-M1:70))
are placed.
Carry out the production after jointing A and B stages.
Producing of D type
Parts run out.
Supplying the parts.
Production continues.
Machine is running.
3Y3C-008E
B stage moves.
3Y3C-E-EMD01-A01-04
Page 1-10
∗1: It changes depending on the moving distance of X-Y table and the type of part.
∗2: This is the best tact time to fill the conditions below.
• Movable range of board X-Y table is within 11 mm, and feeder table does not move.
∗3: Board changing time is the time after mounting the last part and before mounting the first part
on the next board. (It does not include the movement of feeder axis.)
∗4: Data is created by PT100. This machine can correct only some of data.
∗5: The value in the parenthesis includes the height to the indicator light.
∗6: The mounting accuracy is that of board mark (2 diagonal points) recognition by the dummy chip
of our specification.
1-4 Specifications of Units
1-4-1 Machine Specifications
4G3C-001TE
3Y3C-E-EMD01-A01-03
smetI snoitacificepS
emitgnitnuoM
∗∗
∗
∗∗1
580.0 s pihcrep
∗2
)trappihclareneG(
11.0 s 03.0otpihcrep s )POSsahcusstrapegraL(pihcrep
emitgnignahcdraoB
∗∗
∗
∗∗3
UM/1M/M-S88MC
8.3:noitingocerdraobtuohtiW s
8.4:noitingocerdraoB s
D-C88MC
5.6:noitingocerdraobtuohtiW s
5.7:noitingocerdraoB s
emitgnitcetedkramdaB
.02s 01sielbatY-Xfoecnatsidgnivomehtnehw(tnioprep mm )
elgnagnitnuoM
)eerged1hcaeroftesotelbaliava(seerged953otseerged0
ycaruccagnitnuoM
∗∗
∗
∗∗5
UM/1M/M-S88MC ± 50.0 mm
D-C88MC ± 01.0 mm
egnargnitnuoM
)sreenignEroF(launaMgnitarepOni”egnaRgnitnuoM2-4-1“eeS
noitceridwolfdraoB
)sreenignEroF(launaMgnitarepOni”noitceriDwolFdraoB3-4-1“eeS
metsyslortnoC
retupmocorciM
yromemlanretxE
DHnognidneped,atadarepyrassecensisetybM1(.001TPotdevassiataD
)001TPfoemulov
eceip/epyt1ksidyppolfhcni-5.3
atadmargorP
∗∗
∗
∗∗4
stniop0005.xamatadkcolB
snoisivid001.xamkcolbforebmuN
stniop0005.xamtniopforebmuN
ylppusrewoP
1M/M-S88MC
V002sesahp3 ± zH06/05CAV01
D-C88MC
UM-S88MC
zH06/05CAV004sesahp3
noitautculfelbatpeccafomumixaM ± %5
V084/V044/V004/V083egatlovtupnI
rewoP
0.6 AVk
erusserpriaylppuS
5.0 aPM 8.0ot aPM
emulovriaylppuS
003 nim/l
snoisnemidlacisyhP
M-S88MC0526 mm )W( × 4271 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
1M-S88MC0133 mm )W( × 0181 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
UM-S88MC0526 mm )W( × 0181 mm )D( × 0502 mm )sknabrotacidnignidulcni()H(
D-C88MC0526 mm )W( × 4491 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
ssaM
UM/M-S88MC0054 gk
1M-S88MC0024 gk
D-C88MC0084 gk
noitidnoclatnemnorivnE
01:erutarepmeT C˚ 53ot C˚
)noitasnednocerutsiomoN(%57ot%03:ytidimuH
DEL
UM-S88MC Wm5.0:rewoP,mn008:htgnelevaWgnittimEthgiL1SSALC
esioN
UM-S88MCBd67