OPERATING MANAUAL(FOR ENGINEERS).pdf - 第81页
Page 4-3 DA T A MODIFICA TION 4 4-2 Board Data Board data is checked. 1 . Press PCB data . • Board data screen appears. 2 . Correct data if necessary . • Only data for origin offset and bad board mark position can be cor…
Page 4-2
uneM stnetnoC
atadBCP
.detcerrocdnadekcehcsiataddraoB
atadlaicudiF
.detcerrocdnadekcehcsiatadnoitingocerdraoB
tonsiti,hctiwsnoitcnufybFFOdenrutsinoitingocerdraobnehW
.elbissecca
hctiwsnoitcnuF
.detcerrocdnadekcehcsievirdfonoitidnocehttesothctiwsnoitcnuF
)edomssapehtgnittesylnO(
atadkcotS/tuoyalredeeF
.rehtegotdetacidnieraatadkcotsdnatuoyalredeeF
.detcerrocdnadekcehcsiesunispihcfoataD
atadetubirttakcolB
.detcerrocdnadekcehcsiatadetubirttakcolB
atadtnuoM
.detcerrocdnadekcehcsiatadtnuoM
kcehcataD
.dekcehcsiatadnoitcudorP
tnirpmroF
.tuptuosiatadnoitcudorP
hcaetataddorP
.yrassecenfidegnahcsiataddnathguatsiatadnoitcudorP
)noitarepognirudelbisseccatonsitI(
.gnihcaetrof”gnihcaeT5retpahC“
3Y3C-E-EMD04-A01-00
4-1 Data Modification Menu
Data modification menu
3Y3C-038TE
Page 4-3
DATA MODIFICATION
4
4-2 Board Data
Board data is checked.
1. Press PCB data .
• Board data screen appears.
2. Correct data if necessary.
• Only data for origin offset and bad board mark
position can be corrected.
• PCB size ..................... L corresponds to X direction and W to Y direction of mount data.
• Coordinate origin....... Origin mark becomes coordinate origin (0, 0), viewed from the front of
machine.
• Origin offset ............... Offset for whole board; mount, board recognition and bad mark coordi-
nates.
• Bad PCB mark pos .... Board with this coordinate mark is judged as bad board and not mounted.
3Y3C-E-EMD04-A01-00
Page 4-4
4-3 Fiducial Data
Board recognition data is checked.
(When the board recognition is turned OFF by function switch on PT100, it is not accessible.)
1. Press Fiducial data .
• Board recognition data screen appears.
2. Correct data if necessary.
• All data can be corrected.
• Recog mode ............. Recognition points differ according to mode.
The more points are, the more accurate data is corrected.
• Recog posn .............. Recognition position and REF are set.
3Y3C-E-EMD04-A01-00