OPERATING MANAUAL(FOR ENGINEERS).pdf - 第84页
Page 4-6 Fiducial Data 4-3-2 Evolution Data For block recognition, all recognition coordinates extended from recognition position coordinates of board recognition data and each block origin coordinate of block attribute …
Page 4-5
DATA MODIFICATION
4
Fiducial Data
4-3-1 Selecting REF
Basically board recognition is carried out by shape, so only shape set is selected.
1. Press REF sel .
2. Press shape set (Auto) or
shape set (Manual) .
• shape set (Auto)
Basically this mode is selected in board
recognition.
The lamp value of camera is automatically set.
• shape set (Manual)
This mode is selected for shape set (auto)
when recognition cannot be done.
The operator sets the lamp value of camera by
hand.
3. Enter data of board recognition mark.
• Color
Set the color, black or white, to be judged in
recognizing.
• Shape
Select corresponding shape.
• Size
Enter the size of selected shape, referring to
figure.
∗ When AB point or AB points are selected,
set B point in the same procedures.
3Y3C-E-EMD04-A01-00
Page 4-6
Fiducial Data
4-3-2 Evolution Data
For block recognition, all recognition coordinates extended from recognition position coordinates of
board recognition data and each block origin coordinate of block attribute data can be checked.
1. Press Evolution data .
∗ Evolution data is indicated only when
AB points or A points of recognition mode is
selected.
3Y3C-E-EMD04-A01-00
Page 4-7
DATA MODIFICATION
4
4-4 Feeder Layout / Stock Data
Feeder layout and stock data are indicated together, and feeder state arranged on the stage is
checked. The chip data for use is also checked and corrected.
1. Press .
• The screen for feeder layout and stock data
appears.
2. Correct data, if necessary.
• Only style, depth, and chip name can be
corrected.
∗ See “4-5 Chip Data,” for correcting chip name.
• Press Call by adr , and entering address
number moves the cursor to the set feeder
address.
• Style.......................... 0 degree and 180 degrees, and 90 degrees and -90 degrees are changed
in turn by every pressing.
• Depth ........................ Paper and the embossed are changed in turn by every pressing.
Feeder layout
Stock data
3Y3C-E-EMD04-A01-01