OPERATING MANAUAL(FOR ENGINEERS).pdf - 第95页
Page 4-17 DA T A MODIFICA TION 4 4-9 Data Check Production data is checked. 1 . Press Data check . • Data check screen appears. Normal data • Some data may not be checked by function switch (set by PT100). • For proper d…
Page 4-16
3Y3C-E-EMD04-A01-00
4-8 Function Switch
The setting of function switch to set the condition of driving is checked and corrected.
1. Press Function switch .
• The function switch screen appears.
• Only the pass mode, ON and OFF can be
changed.
Other conditions are only checked and set on
PT100 side.
• Pass mode..................................Board is transferred to the post-process not mounted.
• Board recognition......................Board is recognized.
• Bad board mark inspection ......Bad board mark is recognized.
• Bad block mark inspection .......Bad block mark is recognized.
Page 4-17
DATA MODIFICATION
4
4-9 Data Check
Production data is checked.
1. Press Data check .
• Data check screen appears.
Normal data
• Some data may not be checked by function
switch (set by PT100).
• For proper data, “OK” appears
Abnormal data
• When data has an error, “Error” appears, and
when the adjustment switch does not match to
that in standard setting, “Warning” appears.
2. After checking abnormal data, press
Check continue .
• Pressing displays data modification
menu.
3Y3C-E-EMD04-A01-01
4G3C-EEn-DmDc-001
Page 4-18
4-10 Form Print
Production data is output to the printer.
1. Press Form print .
• Form print screen appears.
2. Select the switch for information to
output, and press Run .
• Switch is highlighted by selecting information,
and canceled by pressing it again.
You can select some data at once.
∗ When quitting to output, press
STOP
on the
operation panel.
∗ Only when and Chip data are selected at the same time, parts layout and chip
data information are output.
3Y3C-E-EMD04-A01-00
1
2
Parts layout
Stock data