OPERATING MANAUAL(FOR ENGINEERS).pdf - 第32页
Page 32 3Y3C-E-EMD00-A04-01 PRECAUTIONS FOR USE How to stop the vacuum pump motor NOTICE V acuum pump motor don ’ t stop by emergency switch and cover switch. Only stop by main switch. 4W3C-AD00 Vacuum pump
Page 31
3Y3C-E-EMD00-A04-00
SERIAL PLATE
The serial plate attached to this machine indicates the model name and production number.
3Y3C-AG01
Actual numbers are shown on the plate instead of ∗.
Serial No. ∗∗∗∗∗∗∗∗
Manufactured for Matsushita Electric Industrial Co.,Ltd.
Manufactured by Kyushu Matsushita Electric Co.,Ltd. Fukuoka Japan
Made in Japan
Power source AC ∗∗∗ V
Power ∗∗∗ kVA
Phase ∗ ph
50/60Hz
Chip Mounter
Model No. CM88S-M
CM88S-M
4W3C-AB00
Actual numbers are shown on the plate instead of ∗.
CM88S-MU
Volts : AC ∗∗∗ V
kVA
Hz : 50/60Hz
: ∗∗∗ kVA
Phase/Wires : ∗ ph
Required air power : ∗∗∗ MPa
Air consumption :
Serial No. ∗∗∗∗∗∗∗∗
Manufactured year : 2002
Manufactured for Matsushita Electric Industrial Co.,Ltd.
Manufactured by Kyushu Matsushita Electric Co.,Ltd.
441-13 Nagahasu Tateishi machi Tosu city Saga Japan
Made in Japan
∗∗∗
Chip Mounter
Model No. CM88S-MU
Page 32
3Y3C-E-EMD00-A04-01
PRECAUTIONS FOR USE
How to stop the vacuum pump motor
NOTICE
Vacuum pump motor don’t stop by emergency switch and cover switch.
Only stop by main switch.
4W3C-AD00
Vacuum pump
Page 33
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but basic structure is as follows.
1-1-1 Starting Production
1. Press
Production
.
•“Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following marks are used for description.
3Y3C-E-EMD00-A04-01
Title
Title
Actual operation
Actual operation
Supplementary description on operation
Supplementary description on operation
Operating procedure number
Operating procedure number
: These show operation flow.
: These show operation (cause) and
effect.
: This shows referential item.
: This shows engineer’s operation.
: This shows pressing a key on
touch panel.
: This means pressing
UNLOCK
and then
START
on operating panel within 2
seconds.
: This means pressing B key while
holding A key.
UNLOCK
START
A B
+
Engineer
Run