OPERATING MANAUAL(FOR ENGINEERS).pdf - 第111页
Page 5-15 TEACHING 5 T eaching the Chip Recognition When chip recognition is required When following troubles occur , check teaching the chip recognition. Case 1. At specified unit during produc- tion, a recognition erro…
Page 5-14
5-4 Teaching the Chip Recognition
5-4-1 Chip Recognition
This equipment catches chips by pickup with nozzle, pickup position and angle of chip varies for
each time. Recognition is carried out to correct pickup position and angle deviation.
5-4-2 Flow Chart of Teaching the Chip Recognition
Start teaching
Pickup chip
Correct pickup position
Recognition
Estimate recognition
End of teaching
3Y3C-E-EMD05-A01-00
Page 5-15
TEACHING
5
Teaching the Chip Recognition
When chip recognition is required
When following troubles occur, check teaching the chip recognition.
Case 1. At specified unit during produc-
tion, a recognition error occurs.
Case 2. By recognition fault information in
reference production report, many
errors occur at specified unit.
3Y3C-E-EMD05-A01-01
Page 5-16
Teaching the Chip Recognition
5-4-3 Before Teaching the Chip Recognition
Many recognition errors are due to a problem with chip data, but they can be rectified by correcting.
It can be thought that teaching the chip recognition is mainly used for checking chip data, as for
chip other than block matching recognition.
Although the chips with problems can be checked by teaching the chip recognition, check the
following items first.
a) Check that chip data in use is proper.
Operating procedure to checking chip data
Feeder layout
Stock data
3Y3C-E-EMD05-A01-00
1
Press
Data modify
.
2
Press .
To the next page