OPERATING MANAUAL(FOR ENGINEERS).pdf - 第73页

Page 3-9 CHANGING PRODUCTION BOARD 3 3-5 Setting and Checking Materials Not to produce bad board, check that the materials in data and those set on the feeder table are proper , in the following procedures. ∗ For setting…

100%1 / 168
Page 3-8
3-4 Adjusting Pin Positioning Unit (Option)
Setting the reference
Check that the reference of mounting board is the pin hole or edges, and set it following the figure
below.
Adjusting the procedure
Adjust pin following the procedure below.
1. Loosen the lock bolt of movable pin.
2. Slide the movable pin by hand to
adjust.
3. Tighten the lock bolt.
M97E
TURN OFF THE POWER AND THE SERVO SWITCH BEFORE WORKING INSIDE
ACTIVE PART OF THE MACHINE FOR MACHINE SET-UP.
You will have serious injury if the machine is actuated.
WARNING
Positioning pin
Lock bolt
3Y3C-E-EMD03-A01-00
Edge reference
Pin hole reference
• Pin hole reference
Put out the pin as the procedures
1
to
3
in the right figure.
90° rotation
• Edge reference
Push the pins as the procedures
1
to
3
in the left figure.
Operating procedure
3Y3C-049E
3Y3C-050E
90° rotation
1
2
3
1
2
3
90° rotation
90° rotation
3P3C-PS027
Page 3-9
CHANGING
PRODUCTION BOARD
3
3-5 Setting and Checking Materials
Not to produce bad board, check that the materials in data and those set on the feeder table are
proper, in the following procedures.
∗ For setting the feeder, see “Chapter 6 Setting Materials” in OPERATING MANUAL for Operators.
1. Press
Data modify
.
• Data modification menu screen appears.
2. Press Form print .
• Form print screen appears.
3. Press .
4. Press Run .
• The data is printed with the printer.
∗ To stop outputting, press
STOP
on the opera-
tion panel.
( 4-10 Form Print)
To the next page
3Y3C-E-EMD03-A02-00
1
2
Feeder layout
Stock data
Page 3-10
Setting and Checking Materials
5. Check that set feeder corresponds to
that of form print.
6. After checking, press .
• Data modification menu screen reappears.
7. Press .
• Main menu screen reappears.
3Y3C-E-EMD03-A02-00
3Y3C-051E
3Y3C-EEn-DmFp-001
3Y3C-EEn-Dm-001
∗∗∗∗
Feeder arrangement
****
Adrs Part name
1 1005
2 1608
3 2125
4 S-M-Tr
5 M-Tr
Type Chip name
8mmSmallReel 1005C
8mmSmallReel 1608R_t0,45
8mmSmallReel 2125R_t0,5
12mm Small S mini Tr(3Pin)
12mm Small Mini Tr(3Pin)
Style DeepSkip
-90 Pa
-90 Pa
-90 Pa
Em
Em
Mode =Xchange mode
180
0
YYYY-MM-DD (∗) HH:MM:SS
File name : CREATE
CM88C 1.45(215)
Machine serial No : YAZY1CM