00193325-01.pdf - 第68页

5 Error inf ormation and T SS SIPLACE Sof tware Guide SR.503.xx 5.2 Calling error information Issue 12/01 EN 68 5 Fig. 5.2 - 1 Main view with error message (Example: S-25 HM) Key to Fig. 5.2 - 1 (1) T ype o f error (T ra…

SIPLACE Software Guide SR.503.xx 5 Error information and TSS

Issue 12/01 EN 5.1 General

5 Error information and TSS

5.1 General

If errors occur during operations at the placement station, you can call up information about the

possible causes and ways of eliminating the error in question. 5

To do this click the button to start the Help system for the station computer (Online help

system on page 75). 5

– The information displayed will always be related to the error that is currently displayed on

screen, and from which the Help system was called.

– You can find information about other errors using the help system index. Simply enter the num-

ber of the error you wish to find, and the system will call up the description that belongs to this

error.

Clicking on the button starts the Technical Solution System (TSS). The TSS is op-

tional. 5

5.2 Calling error information

If an error occurs during operation, the appropriate error message is displayed in red in the status

bar of the user interface. In the Error view, the icons for Error information and Technical Solu-

tion System are both active (see Fig. 5.2 - 1). 5

You use the button to clear an error after the cause of the error has been eliminated. 5

5 Error information and TSS SIPLACE Software Guide SR.503.xx

5.2 Calling error information Issue 12/01 EN

Fig. 5.2 - 1 Main view with error message (Example: S-25 HM)

Key to Fig. 5.2 - 1

(1) Type of error (Track, machine, transport or general error)

(2) Error number (The error number assigned to the error)

(3) Error message (Short information about the error)

(4) „Clear error“ button (Used to acknowledge the error after the cause of the error

has been eliminated)

(5) „TSS“ button (Used to call the Technical Solution System)

(6) „Error information“ button (Used to call up help on the current error)

12 3 456

SIPLACE Software Guide SR.503.xx 5 Error information and TSS

Issue 12/01 EN 5.2 Calling error information

5.2.1 Displaying information on the current error

 Click the button in the main view.

The main Help system window is opened with information on the currently selected error (see

example in Fig. 5.2 - 4).

 Click the button in the Main view.

This starts the Technical Solution System (TSS). See example in Fig. 5.2 - 3