00192471-03.pdf - 第13页
User Manual SIPLAC E HS-50 1 Introduction Software Vers ion SR.50x.xx 01/2006 US Edition 1.5 EU Declaration of Conformity 13 1.5 EU De clara tion of Confor mity The produc t/devic e describ ed below 1 Produc t: Placem en…
1 Introduction User Manual SIPLACE HS-50
1.3 Danger notes Software Version SR.50x.xx 01/2006 US Edition
12
Service engineers 1
This class is intended for engineers from SIEMENS. They are trained to carry out servicing work
and to upgrade and retrofit the placement system. 1
1.3 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this User Manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.4 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of Sie-
mens AG proceed from the conclusion of the contract concerned, under which you have the ma-
chine described herein. This applies in particular to all statements regarding performance or
service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual. 1
User Manual SIPLACE HS-50 1 Introduction
Software Version SR.50x.xx 01/2006 US Edition 1.5 EU Declaration of Conformity
13
1.5 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE HS-50
Item no.: 119000 1
manufactured by 1
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on the
approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the Mem-
ber States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2, EN 60204-1,
EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8, BGV A1
1
, BGV A2
1)
1
1. National specifications
This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
1 Introduction User Manual SIPLACE HS-50
1.6 Revision index Software Version SR.50x.xx 01/2006 US Edition
14
1.6 Revision index
1
1.6.1 Revisions since 11/2000 edition
1
1.6.2 Revisions since 01/2001 edition
1
Instructions Software version Issue
First draft HS-50 Provisional User Manual
5.01 09/98
Revision of HS-50 User Manual
5.01 01/99
Revision of HS-50 User Manual
5.01.03 12/99
Revision of HS-50 User Manual
5.02 11/2000 US
Revision of HS-50 User Manual
5.02 01/2001 US
Revision of HS-50 User Manual
5.0x 01/2006 US
New or modified Chapter / Section
Structure of the User Manual
1.2
Description of the machine
1.8
Overview of the modules - placement heads
1.16
Overview of the modules - PCB conveyor
1.18
Warning signs on the placement system
2.1.9
Additional warning signs for the NAFTA region
2.1.10
Residual voltages in the servo unit and discharge times
2.3
3 x 8 mm S feeder for 0201/0402 components
4.2.3
PCB barcode
5.4
Ceramic substrate centering
5.5
Optical centering with the multicolor PCB camera
5.5.6
Fine calibration
5.8
New or modified Chapter / Section
Warning signs on the placement system
2.1.9
Additional warning signs for the NAFTA region
2.1.10
Safety instructions for processing capacitors based on powdered metal
2.1.15
Feeders
4.1.1
Safety instructions for processing capacitors based on powdered metal
4.1.2
12 mm S module for capacitors based on powdered metal, model C/D
4.2.5
12 mm S module for capacitors based on powdered metal, model E
4.2.6
Optical centering with oblique lighting
5.5.5
Vacuum tooling
5.9