00192471-03.pdf - 第145页
User Manual SIPLACE HS-50 5 Station extensions Software Version SR.50x.xx 01/2006 US Edition 5.1 Nozzle changer for the 12-segment collect&place head 145 PLEA SE NOT E Make su re that yo u inser t the magaz ine so th…
5 Station extensions User Manual SIPLACE HS-50
5.1 Nozzle changer for the 12-segment collect&place head Software Version SR.50x.xx 01/2006 US Edition
144
5.1.5 Changing the magazine
Æ To remove the magazine, push the spring hook (item 1 in Fig. 5.1 - 3) away from the magazine.
Lift the magazine out of the carrier.
Fig. 5.1 - 3 Changing the magazine
(1) Spring hook
(2) Retaining clamp
(3) Centering hole
(4) Slot
(A)Push the spring hook away from the magazine
User Manual SIPLACE HS-50 5 Station extensions
Software Version SR.50x.xx 01/2006 US Edition 5.1 Nozzle changer for the 12-segment collect&place head
145
PLEASE NOTE
Make sure that you insert the magazine so that the centering pins slide into the centering hole
(item 3) and slot (item 4). 5
Æ First place the side of the magazine with the numbered nozzles 1, 2, 3 and 4 on the carrier.
The retaining clamp (item 2) must slide into the slot in the magazine.
Æ Push the spring hook away from the magazine.
Æ Press the magazine so that it lies flat on the carrier, then release the spring hook. The spring
hook must latch into place.
5.1.6 Position detection
There is a position detection fiducial on every magazine.
Fig. 5.1 - 4 Nozzle changer - position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial
5 Station extensions User Manual SIPLACE HS-50
5.2 Component barcode Software Version SR.50x.xx 01/2006 US Edition
146
5.2 Component barcode
5.2.1 General
With the HS-50 placement system, a barcode reader can be used to check that the track allocation
is correct and to read component data from component reels. A barcode reader is attached to both
of the operating panels on the placement system.
Fig. 5.2 - 1 Component barcode reader
(1) Component barcode reader