00192471-03.pdf - 第130页

4 Component handling User Manual SIPLACE HS-50 4.4 Tape cont ainer Software V ersion SR.50x.xx 01/2006 US Edition 130 4.4 T ape cont ainer 4.4.1 Ove rview Reels up to 1 5" in diameter may be used , althou gh for 15&…

User Manual SIPLACE HS-50 4 Component handling

Software Version SR.50x.xx 01/2006 US Edition 4.3 Setting up the feeder feeders

129

Fig. 4.3 - 1 Inserting 30 or 45 mm wide feeder modules on the component table

(1) Feeder module, 30 mm wide

(2) Feeder module, 45 mm wide

(3) Feeder module, 30 mm wide

4 Component handling User Manual SIPLACE HS-50

4.4 Tape container Software Version SR.50x.xx 01/2006 US Edition

130

4.4 Tape container

4.4.1 Overview

Reels up to 15" in diameter may be used, although for 15" reels you should use spindles as well.

Insert the spindles into the partitions as shown in Fig. 4.4 - 1

. 4

PLEASE NOTE 4

We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that

the feeder modules operate reliably.

Fig. 4.4 - 1 Component table and tape container

(1) Component table (2) Spindle position for 15" reels

(3) Waste tape container (4) Partition

(5) Tape container (6) Spindles

User Manual SIPLACE HS-50 4 Component handling

Software Version SR.50x.xx 01/2006 US Edition 4.5 Used tape cutter

131

4.5 Used tape cutter

Fig. 4.5 - 1 Position of the used tape cutter

(1) Used tape cutter

(2) Used tape guide channel