00192471-03.pdf - 第55页
User Manual SIPLAC E HS-50 2 Oper ational Safety Software Version SR.50x.xx 01/2006 US Edition 2.1 Safety instructions 55 2 Item 10 in Figure 2.1 - 1 show ing the warning lab els on the safety s creens of the machi ne 2 …
2 Operational Safety User Manual SIPLACE HS-50
2.1 Safety instructions Software Version SR.50x.xx 01/2006 US Edition
54
2
Item 6 in Figure 2.1 - 1 showing the warning signs on the basic machine on the service sokket
(behind the safety doors in the power supply unit) 2
2
Item 7 in Figure 2.1 - 1 showing the warning signs on the basic machine - permanent magnets for
the y axes 2
2
Item 8 in Figure 2.1 - 1 showing the warning signs on the placement system - on the servo unit2
2
Item 9 in Figure 2.1 - 1 showing the warning signs on the placement system - on the UPS and
station computer (beneath the PCB conveyor) 2
Warning!
When the main switch is switched off
under voltage
8
Attention
!
Wait at least 20 seconds before
removing the modules to allow
the capacitors to discharge fully
Warning!
When the main switch is switched off
under voltage
User Manual SIPLACE HS-50 2 Operational Safety
Software Version SR.50x.xx 01/2006 US Edition 2.1 Safety instructions
55
2
Item 10 in Figure 2.1 - 1 showing the warning labels on the safety screens of the machine 2
2
Item 11 in Figure 2.1 - 1 showing the warning labels on the cover plate of the placement system2
2 Operational Safety User Manual SIPLACE HS-50
2.1 Safety instructions Software Version SR.50x.xx 01/2006 US Edition
56
2
Item 12 in Fig. 2.1 - 1 showing the warning signs on the basic machine 2
Item 13 from the diagram 2.1 - 1
on page 51 showing the warning signs on the placement system
Feeder label (enlarged)
DANGER 2
Use only feeders, labeled as shown above, when feeding capacitors based on metal-powder (e.g.
tantalum). 2
2
WARNING
WARNUNG
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
Use only approved feeders, labeled
as shown below, when feeding
capacitors based on metal-powder
(e.g. tantalum).
Kondensatoren auf Metallpulver-
Basis (z.B. Tantal) dürfen nur mit
folgendermaßen gekennzeichneten
Gurtförderern verarbeitet werden:
13
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis