00192471-03.pdf - 第131页
User Manual SIPLAC E HS-50 4 Component han dling Software Vers ion SR.50x.xx 01/2006 US Edition 4.5 Used tape cutter 131 4.5 Used t ape cutter 4 Fig. 4.5 - 1 Position of t he used tape cutter (1) Used tape cutter (2) U s…
4 Component handling User Manual SIPLACE HS-50
4.4 Tape container Software Version SR.50x.xx 01/2006 US Edition
130
4.4 Tape container
4.4.1 Overview
Reels up to 15" in diameter may be used, although for 15" reels you should use spindles as well.
Insert the spindles into the partitions as shown in Fig. 4.4 - 1
. 4
PLEASE NOTE 4
We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that
the feeder modules operate reliably.
Fig. 4.4 - 1 Component table and tape container
(1) Component table (2) Spindle position for 15" reels
(3) Waste tape container (4) Partition
(5) Tape container (6) Spindles
User Manual SIPLACE HS-50 4 Component handling
Software Version SR.50x.xx 01/2006 US Edition 4.5 Used tape cutter
131
4.5 Used tape cutter
4
Fig. 4.5 - 1 Position of the used tape cutter
(1) Used tape cutter
(2) Used tape guide channel
4 Component handling User Manual SIPLACE HS-50
4.5 Used tape cutter Software Version SR.50x.xx 01/2006 US Edition
132
4.5.1 General
The placement system has a used tape cutter at each of the four component table locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component table. 4
Æ Empty the waste tape container every day.
Fig. 4.5 - 2 Used tape cutter
(1) Pneumatic cutting device
(2) Short-stroke lifting cylinder
(3) Opening for removal of the used tape