00192471-03.pdf - 第31页

User Manual SIPLAC E HS-50 1 Introduction Software Version SR.50x.xx 01/2006 US Edition 1.14 Overview of the modules - controls 31 1.14.3.1 Controls on the lef t / right-hand operating p anel of the placement system The …

1 Introduction User Manual SIPLACE HS-50

1.14 Overview of the modules - controls Software Version SR.50x.xx 01/2006 US Edition

Keyboard 1

A keyboard with the trackball is located beneath each screen. The keyboards can be pulled in and

out as required. 1

Indicator lamps 1

The sequence of colors is white - green - white. These lamps are used to signal operating statuses

and malfunctions of the placement system. 1

Component barcode reader 1

There is a compartment for a Datalogic DL 910 component barcode reader on either side of the

machine. The barcode reader enables the components to be set up and topped up quickly and

reliably. 1

1.14.3 Ergonomic arrangement of the controls

Figure 1.14 - 1 on page 30 provides an overview of the position of the controls, which are subdi-

vided into the following groups: 1

Operating panel on the right-hand side of the central console with 1

– LCD screen

– Keyboard with trackball

– Start button

– Component barcode reader

Operating panel on the left-hand side of the central console with 1

– LCD screen

– Keyboard with trackball

– Component counter

– Start button

– Stop button

–Key switch

– Component barcode reader

– Main switch

Input / output side of the PCB conveyor with 1

– Emergency stop buttons

User Manual SIPLACE HS-50 1 Introduction

Software Version SR.50x.xx 01/2006 US Edition 1.14 Overview of the modules - controls

1.14.3.1 Controls on the left / right-hand operating panel of the placement system

The two operating panels have identical control functions. 1

Monitor, keyboard, Start and Stop buttons 1

There is a monitor and a keyboard on both sides of the placement system. They are arranged so

that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

The Start and Stop buttons are located beneath the keyboard. The on-screen dialog will occasion-

ally prompt you to activate certain actions using buttons, and this arrangement will make it easier

for you both to activate and to interactively control these actions. 1

Key switch 1

The key switch is located on the left-hand operating panel beneath the Start and Stop buttons. It

is only needed for setting up and servicing work so, for reasons of efficiency, it is positioned near

the Start and Stop buttons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand operating

panel. It is located here because it is only needed for servicing and maintenance work. With re-

spect to its infrequent use the switch is still ergonomically positioned. 1

Component barcode reader 1

The four component tables for supplying components are arranged on the right and left of the

placement system. For this reason, the component barcode readers are also located in the central

consoles, since it enables the operators to work comfortably and efficiently during the component

set-up and filling checks. 1

1.14.3.2 Controls on the input and output side of the placement system

The controls on the input and output side of the placement system are identical. 1

Emergency stop button and Start button 1

An emergency stop button and two Start buttons are located on both the input and the output side

of the PCB conveyor. This arrangement was adopted for the emergency stop buttons because it

enables them to be reached quickly and easily from any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This is particularly important during testing phases or when starting

single functions, for example. 1

1 Introduction User Manual SIPLACE HS-50

1.14 Overview of the modules - controls Software Version SR.50x.xx 01/2006 US Edition

1.14.4 Technical data - component barcode reader

Fig. 1.14 - 2 Component barcode reader

(1) Component barcode reader

Connected to Station computer

Data entry Via barcode scanner or keyboard

Number of characters Up to 40

Not admissible Barcodes starting with a 1, 2, 3, or 4

of less than 5 characters long

Number of barcodes Up to 6 per component

Filter for masking out data Up to 1 per barcode

Preset code types Code 39 (standard or ASCII)

Code 2 of 5 interleaved and normal,

Code 128, UPC/EAN/JAN codes

(others available upon request)