HS50的结构及原理.pdf - 第22页
2 Operational Safety Adjustment Instructions SIPLACE HS-50 2.1 Safety Instructions Edition 05/00 22 Item 9 of fig. 2.1 - 1 show ing the warning signs o n the ba sic machine - o n the un inter ruptable power sup ply and…
Adjustment Instructions SIPLACE HS-50 2 Operational Safety
Edition 05/00 2.1 Safety Instructions
21
Item 6 of fig. 2.1 - 1
showing the warning signs on the service socket of the basic machine
(behind the protective door in the power supply plug - in unit)
Item 7 of fig. 2.1 - 1
showing the warning signs on the basic machine -
permanent magnets of the y-axes
Item 8 of fig. 2.1 - 1
showing the warning signs on the basic machine - on the servo unit
:DUQLQJ
All parts marked with this sign
are still energized -
even when the main switch
is switched off !
7
WARNING! MAIN POWER VOLTAGE!
Completely isolate the machine
before removing the protective cover.
Capacitor discharge time
tmin. = wait ca 3 - 5 minutes
2 Operational Safety Adjustment Instructions SIPLACE HS-50
2.1 Safety Instructions Edition 05/00
22
Item 9 of fig. 2.1 - 1
showing the warning signs on the basic machine - on the uninterruptable
power supply and on the station computer (below the PCB conveyor).
Item 10 of fig. 2.1 - 1
showing the warning signs the protective covers of the basic machine
Item 11 of fig. 2.1 - 1
showing the warning signs on the basic machine on the cover plate
:DUQLQJ
All parts marked with this sign
are still energized -
even when the main switch
is switched off !
1LFKWLQGLHODXIHQGH
0DVFKLQHJUHLIHQ
'RQRWSXW\RXUKDQGV
LQWRRSHUDWLQJPDFKLQH
Adjustment Instructions SIPLACE HS-50 2 Operational Safety
Edition 05/00 2.1 Safety Instructions
23
6D IH W\,QVWUXFWLRQV IRU2SHQLQJWKH3 URWH FWLYH&RYHUV
To prevent any risk of injury when the protective covers on the machine are closed, the owner
must instruct his operators to use the protective covers exactly as specified in the following
description.
RISK OF TRAPPING FINGERS IF THE PROTECTIVE
COVERS ARE OPENED OR CLOSED INCORRECTLY
(1) Protective hoods
(2) Recessed grips
Å For opening and closing always and exclusively hold both hands on the recessed grips.
NOTE
In case of diminishing strength of the shock absorbers due to daily usage, you risk crushing your
fingers, if you do not close the protective covers by holding the recessed grips only.