00197467-01_SM_DLM3-4_Kunde_en.pdf - 第5页
Contents: Service Manual SIPLACE Placement Heads DLM3/DLM4 5 6 Description of the Circuit Boards 83 6.1 Base adapter DLM [03081413-xx] 83 6.2 SP_12 Digital Intermediate Distributor [00330648 -05] 85
Contents:
4 Service Manual SIPLACE Placement Heads DLM3/DLM4
3.12 Replacing the Z Axis Toothed Belt [00334936-xx] 45
3.13 Replacing the "Z Axis Down" Sensor [00321524-xx] 47
3.14 Replacing the Complete Z Axis [03001959Sxx] 48
3.15 Replacing the Forced Air Unit [00367793-xx] 50
3.16 Replacing the Silencer [03003134-xx] 51
3.17 Replacing the Star 52
3.17.1 Adjusting the Star to the Star's Magnetic Neutral Position53
3.17.2 Replacing the Air Blast Supply to the Star [03000896-xx] 55
3.17.3 Replacing the Silicone Hoses on the Star [00341183S01] 55
3.18 Replacing the Star Drive 57
3.19 Replacing the RSF Digital Rotary Encoder (DP Axis) [00335990-xx] 58
3.20 Press-fit Connections with Fixture Clips on the Vision Board60
3.21 Replacing the Raceway (Circular Arc Guide) 60
3.22 Replacing the Membrane (Vacuum Plate) on the Sleeve [03037984-xx] 61
3.23 Replacing the Vacuum Hoses on the Head 62
4 Measuring Equipment and Tools 63
4.1 Z Axis Gauge (Old) [00331308-xx] 63
4.2 RC Filter [02102858-xx] 63
4.3 Calibration Tool [03010565-xx] 63
4.4 Calibration Tools for Vision Systems 64
4.5 Z End Stopper Star Gauge for C&P6/12 [03019865-xx] 64
4.6 Power Pack for Star Installation 64
4.7 Adjustment Aid for C&P DLM [00327005-xx] 65
4.8 Belt Tensioning Device for Turning Station DLM [03063649-xx] 65
4.9 Belt Tension Measuring Device (00326015-xx) 65
4.10 Adjustment Valve Plunger for DLM Heads 66
4.11 Antistatic Tweezers 66
4.12 Universal Placement Head Mounting Rack [03056231-xx] 66
5 Settings 67
5.1 Overview of Settings 67
5.2 Setting the Resolution on the Star Axis 68
5.3 Setting the Digital Rotary Encoder for the DP Axis 68
5.4 Setting the Z axis Belt Tension 69
5.5 Adjusting the Stop for the Z Axis 69
5.6 Setting the Light Barrier Down 71
5.7 Determining the Zero Point Correction for the Star Axis of the C&P Head 72
5.8 Adjustment of air pressure values 73
5.9 Vacuum Test 75
5.10 DLM4 Assembly with adapter plate 78
5.11 Other Mechanical Settings on the Star 78
5.12 Firmware Download (SW 70x) 79
5.13 Calibration 80
5.13.1 Calibrating the Heads and Cameras (SW60x) 80
5.13.2 Calibrating the Heads and Cameras (SW70x) 81
5.13.3 Calibration Procedure 81
Contents:
6 Service Manual SIPLACE Placement Heads DLM3/DLM4