00197467-01_SM_DLM3-4_Kunde_en.pdf - 第7页
Introduction 1.1.1 Conventions for the use of safety instructions Safety Instructions Service Manual SIPLACE Placement Heads DLM3/DLM4 7 1 1 I n t r o d u c t io n Introduction This service guide is a manual or reference…
Contents:
6 Service Manual SIPLACE Placement Heads DLM3/DLM4
Introduction
1.1.1 Conventions for the use of safety instructions Safety Instructions
Service Manual SIPLACE Placement Heads DLM3/DLM4 7
1
1 Introduction
Introduction
This service guide is a manual or reference work for performing service work on the SIPLACE® DLM3
and DLM4 placement head types.
1.1
1.1 Safety Instructions
Safety Instructions
1.1.1
1.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam
-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord
-
ing to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam
-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam
-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.
Introduction
Safety Instructions 1.1.2 Safety Instructions for the Compressed Air Supply
8 Service Manual SIPLACE Placement Heads DLM3/DLM4
1.1.2
1.1.2 Safety Instructions for the Compressed Air Supply
Safety Instructions for the Compressed Air Supply
1.1.3
1.1.3 Safety Instructions on Hazardous Materials
Safety Instructions on Hazardous Materials
CAUTION
Risk of injury from compressed air!
Risk of injury when disconnecting the compressed air lines.
► NEVER disconnect compressed air lines while they are still pressurized.
CAUTION
Prolonged interruptions to the compressed air supply can cause damage.
When the machine is switched on, do not use the shutoff valve to interrupt the compressed air
supply for more than 30 minutes.
► If you need to shut off the compressed air system for longer in order to carry out your work,
you must switch the placement system off at the main switch and disconnect it from the
power supply.
CAUTION
Observe the safety data sheets
Observe the applicable safety data sheet, when handling hazardous materials (e. g. Loctite
241, ethanol).