NXTII spec.pdf - 第30页

Machine Structure



Edition 2.0E - 29 - NXT II Specifications

4.11. Loading Feeders at the Ends of a Pallet

Slot No.

Feeder

1 2 3 4 5 … 14 …

16

(41)

17

(42)

18

(43)

19

(44)

20

(45)

W8 O O O O O

O O O O

O

*1

W12 × O O O O

O O O O

×

W16 × O O O O

O O O O

×

W24 × O O O O

O O O O

×

W32 × × O O O

O O O O

×

W44 × × O O O O O O × ×

W56 × × × O O

O O O

× ×

W72 × × × O O O O × × ×

W88 × × × × O O × × × ×

Type1 × O O O O O

O O O

×

Single

Stick

Feeder

Type2 × × O O O

… … …

O O O × ×

GCU × × × × × … O … × × × × ×

Note:

Numbers in brackets in the “Slot #” row represent slot numbers for M6II, M6IISP modules.

Checks in the table indicate the slot numbers that each feeder can be set on.

Conditions are common regardless of the reel holder type (standard feeder reel holder specification, or bucket

specification).

GCU is loaded on slot 14.

The slots that are used when loading W4P1 feeders at the end of a pallet are the same as for W8 feeders.

The following slot positions cannot be used with a G04 head.

M3II module: No.1, 20

M6II module: No.1, 45

M6IISP module: No.1, 43~44

Machine Control System



Edition 2.0E - 30 - NXT II Specifications

5. Machine Control System

5.1. Machine Control Specifications

Item Specifications

Coordinate input method Absolute

Acceleration control (head) Acceleration/deceleration setting possible (3 stages)

Controllable axes

A total of 4 ~ 9 axes: X, Y, Z, Q, XS, R, TY, TZ, TZ1, TZ2

(No. of axes differ depending on the module, head and device

configurations.)

• The XS-axis is for the M3II module.

• The R-axis is for the H12HS [H12S, H12]/ H08/H04/G04 heads.

• The TY-axis is for the tray unit-L and tray unit-LT.

• The TZ-axis is for the tray unit-L.

• The TZ1, TZ2-axes are for the tray unit-LT.

Maximum number of input

sequences

2000 sequences/module

Maximum number of marks 3505 marks/job

Maximum number of

boards

1000 boards/job

Data input method

Note 1

(units)

Fuji Flexa:

X-, Y-, Z-axes: 0.01 mm

Q-axis: 0.01 degrees

Communication Network based (Ethernet)

Note 2

Optical correction For PCB positioning and part pick-up displacement

Operation panel

* Operator panel: Machine side operation

* Engineering panel: PC operation

Note 3

Note:

1. Data communication is performed using the Fuji Flexa host system.

A computer and host software are required in order to run Fuji Flexa. It is necessary to prepare the host

computer prior to taking receipt of your machine.

2. t is necessary to prepare an Ethernet cable prior to taking receipt of the machine. (100 base TX-cable (100 m

range.))

3. A computer for use with the engineering panel should be purchased by the user in advance. The Accessory

Software is a standard application of NXTII (refer to “8.1.1 NXT Accessory Software”)

* The NXTII can be treated as one machine with bases and modules connected together, however, the

maximum number of modules that can be connected is 32 when using only M3II) modules. M6II, M6IISP

modules are calculated as two M3II) modules. A line with more than 32 modules can be configured by setting

multiple machines within the line. (Settings performed at Fuji Flexa)

Machine Control System



Edition 2.0E - 31 - NXT II Specifications

5.2. Operating Environment

Fuji Flexa Accessory Software

Operating System

Microsoft Windows 2000, SP2 or later

Microsoft Windows XP Professional, SP1 or

later

←

Browser Microsoft Internet Explorer 6.0, SP1 or later ←

CPU

Equivalent of 1GHz or more

(2 GHz or more recommended)

Equivalent of 1GHz or more

Memory 512MB 256MB

Disk

Configuration

Floppy Disk Drive, CD-ROM Drive ←

Display Resolution: 1024 × 768 or higher Resolution: 800 × 600 or higher

Others PC/AT Compatible, Mouse, Ethernet card ←

Note:

1. Microsoft Windows XP Professional is supported from Fuji Flexa V1.5.1 and later. Microsoft Windows XP

Professional is supported from the Accessory Software version for the NXT machine control software V2.71

and later.

Trademarks

Microsoft, Microsoft Windows XP, Microsoft Windows 2000, Windows, and Internet Explorer are the

registered trademarks or trademarks of Microsoft Corporation U.S.A.