NXTII spec.pdf - 第7页
Machine Data and Operatin g Environment Edition 2.0E - 7 - NXT II S pecifications 2. Machine Dat a and Operating Environment 2.1. Machine Dat a and Operating Environment Item Description Power Requirement *1 200 ~ 230V A…
Introduction
Edition 2.0E - 6 - NXT II Specifications
1.2.3. Scalability
The number of modules can be adjusted by moving two M3II modules or one
M6II/M6IISP module to reduce costs and save space.
Furthermore, various types of production can be supported simply by
exchanging the head.
The highly expandable NXTII can easily adapt to future changes.
1.2.4. High Throughput
It goes without saying that the modular configuration of the NXTII results in high
productivity in a compact space.
The NXTII also incorporates various functions for "non-stop" production.
• Both reel and tray parts can be supplied without stopping the machine.
• When combined with Fujitrax (an optional production management
system), the machine can warn operators that parts will run out soon.
Operators can then prepare more parts before the original parts run
out.
• The following functions reduce changeover time: batch feeder
exchange, automatic changeover of back-up pins, automatic
adjustment of conveyor width.
• Multi Job Line Balancer (optional software in Fuji Flexa) analyzes
multiple jobs and determines the device allocation and production
order for the most efficient changeover.
• A double conveyor configuration can reduce panel conveyance time to
zero.
• Production programs can be changed from the first module in a line in
sets of two M3II modules (or one M6II/M6IISP module), which results
in a seamless changeover flow from the current production to the next
production program.
1.2.5. Easy Operation
The graphical interface of the NXTII allows operators to intuitively grasp what
operation should be performed next, which considerably reduces
operator-training time.
The NXTII operation system combines the ability to operate multiple modules as
one machine yet operate modules individually during maintenance.
Machine Data and Operating Environment
Edition 2.0E - 7 - NXT II Specifications
2. Machine Data and Operating Environment
2.1. Machine Data and Operating Environment
Item Description
Power Requirement
*1
200 ~ 230V AC (± 10%), three-phase (50/60Hz)
Air Pressure
*2
0.5 MPa (ANR)
Air Consumption
40 L/min. (ANR) (4MII base machine)
20 L/min. (ANR) (2MII base machine)
+ 100 L/min. (ANR) (when using remover)
+ 35 L/min. (ANR) (when using a GL head)
Dimensions
740.2 mm (2M base)/1,390.2 mm (4M base),
Width: 1,934 mm
Height: 1,476 mm
Weight
4MII base: 715 kg
2MII base: 385 kg
M3II module: 355 kg (double conveyor specification)
M6II module: 520 kg (double conveyor specification)
M6IISP module: 525 kg (double conveyor specification)
Tray unit-LT: 173.7 kg (including 8 pallets and magnets, no remover)
Tray unit-L: 150 kg (including 7 pallets and magnets, no remover)
Tray unit-M: 37 kg
Display Panels
Monitor: Toggle between operation and image monitor
Display: Illustration based operation
Machine Color
*3
Module cover: Silver
Module body: White
Base: Grey, white
Installation Environment
*4
Temperature:15° ~ 35°C
Humidity:30% ~ 80% RH
Elevation:1000 m or under
Supported Safety Standards IP22 or equivalent
*5
, UL standard, CE marking
Notes:
1. Power source: 200 ~ 230V AC (± 10%), three-phase (For more details, refer to “Cautions when installing
NXTII” below).
2. Atmospheric dew point: -17 degrees Celsius or less, Particle size: 5 m or less, Max. oil vapor content: 5
mg/m³ or less. An air source is required when installing the NXTII.
3. The color of the machine cannot be changed.
4. Humidity should be free of condensation. Recommended installation environment --- temperature; 15 ~ 30
degrees Celsius, humidity; 50 ~ 70 %
5. IP22: IEC standardized protection against intrusion by body parts and water.
Machine Data and Operating Environment
Edition 2.0E - 8 - NXT II Specifications
Power Consumption
Type
Estimated maximum power consumption (kVA)
M3II module 1.5
M6II module 1.5
M6IISP module 1.2
4MII base 1.0
2MII base 1.0
Tray unit-L 0.1
Tray unit-LT 0.5
Note: Values change depending on the conditions used.
* Cautions when installing NXTII
The following cautions should be observed when installing the NXTII:
1. A dedicated power source, not shared with other large equipment, should be
used in order to avoid problems with electrical noise, voltage fluctuations,
high-frequency distortions, and other related problems.
2. There is leakage current of approximately 30 mA per one NXTII machine
(one 4MII base with 4 M3II modules). It may be required to consider the
limitation for the number of machines that are connected to a breaker when
using leak detectors. It is also required to install an isolating transformer to
the machine when needed to avoid this electric leakage. The user must
prepare the isolating transformer.
3. When using a short circuit breaker, ensure to use a high-speed model with
sensed current of 100 mA. Use one short circuit breaker for up to two 4MII
bases.
Recommended isolating transformer specifications
Items
Specifications
Phase
Three phase
Frequency
50/60Hz
Primary-side voltage
(input)
Depends on customer’s power supply devices
Secondary-side voltage
(output)
200V±10%
Power consumption Refer to the previous “Power Consumption” item
Note
Must be isolating transformer
Installation location Location in the vicinity of the machine (base) recommended