NXTII spec.pdf - 第42页

NXT Related Software  Edition 2.0E - 42 - NXT II S pecifications Relationship data Machine settings Job Product information Feeder Information Parts information Fujitrax database Fuji Flexa A ccessor y Software Fujitrax…

Options



Edition 2.0E - 41 - NXT II Specifications

Item

H04

M3II

6500

M6II

6500

Parts

presence

function OFF

M6IISP

6000

M3II

6260

M6II

6260

Throughput

CPH

Note 1

(chip/hour)

Parts

presence

function ON

M6IISP

5760

4 Nozzle operation or 2+2 nozzle operation

Same as standard heads (see 3.4 Head Specifications)

2 nozzle operation

Up to 15 x 15 mm or diagonal 21.5 mm or less

Y-direction: 15 mm or less

Applicable part size

Note 3

Single nozzle operation

Up to 24 x 24 mm

*The parts presence check function cannot be used

during single nozzle operation.

Part thickness (Parts presence check

function ON)

0.45 mm or more

Applicable nozzles Nozzles with rubber pads are not supported

1. The value for throughput is the value measured under Fuji conditions..

2. The throughput that can be achieved when using the parts presence check function (check before/after

placement) together with the parts tombstoning check function is the same as when using just the parts

presence check (check before/after placement).

3. The applicable part size which can be used with a head which has the parts presence detection sensor.

4. Tombstoning cannot be detected if the sum of the part thickness dimension t and the thickness tolerance

value t, and the relationship of the part body size with X or Y is t- t ≤ X or Y ≤ t + t.

NXT Related Software



Edition 2.0E - 42 - NXT II Specifications

Relationship

data

Machine

settings

Job

Product

information

Feeder

Information

Parts

information

Fujitrax database

Fuji Flexa

ccessor

Software

Fujitrax

Kitting Station

8. NXT Related Software

8.1. NXT Accessory Software

This is a stand alone piece of software providing machine control capabilities.

All machine settings are performed using this software. Furthermore, it provides

the user with a powerful tool when performing maintenance and inspections.

The main features of the NXT Accessory Software are as follows.

• Data management

• Data editing

• Maintenance support

Note:

A separate computer is required for installation of the NXT Accessory Software.

The computer at which this software is installed is referred to as the “Engineering panel”.

8.2. Fuji Flexa

The Fuji Flexa host software is designed for creation of production programs,

control of the machines, and the acquisition of production information.

Administration of job data for the NXT should be performed using Fuji Flexa.

NXT Related Software



Edition 2.0E - 43 - NXT II Specifications

8.3. Fujitrax

This system has been designed to realize maximum levels of control for parts

loaded on machines in the SMT line, and whose wide range of features include

remaining parts administration, and acquisition of reel parts quantity information,

feeder related information, and also device slot information from the production

program.

By linking with NXTII Fuji feeders (Fuji Intelligent Feeders), Fujitrax is able to

eliminate part misloading, provide parts out warnings, perform feeder

administration, and also prevent defective PCBs and enhance productivity.

Furthermore, it is possible to prevent the occurrence of defective PCBs by

acquiring traceability data for each PCB.

Fujitrax software and hardware are available separately.

Fujitrax: Traceable Realtime Administration

It is possible to arbitrarily set alternate feeders on empty slots on the feeder

pallet when using Fujitrax, therefore dispensing with the need to prepare multiple

empty slots for alternate feeders and set alternate feeder positions in the

program as was required previously. Furthermore, this enables uninterrupted

operation without performing splicing, and prevents the operator from mistakenly

splicing the wrong part.

If the Fujitrax system is adopted, and supply parts are set on the drawer area

below tray unit-L, tray parts are automatically fed following parts out based on

parts out warnings, enabling continuous tray part supply without stopping the

machine.

Also, by mounting a barcode reader on the tray unit-L, tray drawer barcodes are

read automatically when using tray verify with position check (option). By

registering tray drawer barcode and tray part combinations at the Fujitrax system

in advance, it is possible to prevent incorrect setting of parts at the machine.