00197496-01_UM_SiClusterMultiline_DE_EN.pdf - 第124页

How to Configure a Multi Line Job Adding Recipes or Boards 4.3.2 Selecting Board Side for Adding 124 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 4.3.2 4 . 3 . 2 S e le c t in g B o a r d S id e f o r A d d in…

100%1 / 192
How to Configure a Multi Line Job
4.3.1 Defining Options for Adding Boards Adding Recipes or Boards
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 123
4.3.1
4.3.1 Defining Options for Adding Boards
Defining Options for Adding Boards
► In this area you can define how the cluster recipe
names are to be formed when adding boards.
► Go to the Multi Line Recipes tab and select the
icon.
⇨ The Options for Adding Boards dialog box will open.
Parameter Description
Add board side desig-
nator string to the clus-
ter recipe name
Enabled: the entered designator is added to the cluster name recipe. To en-
sure that the top and/or bottom is recognized, enter the relevant designator at
Designator for Top Side and/or Designator for the Bottom Side.
Designator for top side This is the part of the name which is added to the cluster recipe for the top side.
Designator for bottom
side
This is the part of the name which is added to the cluster recipe for the bottom
side.
Add the board side
designator at:
Begin
End
This is where you can define whether the additional designator is to be added
at the beginning or end.
Do not add board
sides without any
placement
If you do not want to add boards without placements, enable this option.
When adding top +
bottom side from one
board put them into a
new inclusive group
Enabled: A new inclusive group is created for the top and bottom sides and is
allocated to the recipe for the top and bottom sides.
How to Configure a Multi Line Job
Adding Recipes or Boards 4.3.2 Selecting Board Side for Adding
124 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
4.3.2
4.3.2 Selecting Board Side for Adding
Selecting Board Side for Adding
If you selected double-sided board descriptions, you will be asked whether the board top and/or bottom
sides should be added. If multiple boards were selected, a separate dialog box will be shown for each
board.
► To add boards, go to the Multi Line Recipes tab and select the icon.
⇨ The Select Board Sides dialog box will be opened.
Dialog box: select board sides
Parameter Description
Board Shows the name of the board you selected.
Board side Top
Defines that the top side of the board is to be added.
Bottom
Defines that the bottom side of the board is to be added.
Top + bottom
Defines that the top and bottom side of the board are to be added.
Use name patterns
(add prefix / suffix)
If special parts of the name have been used to identify the board, you can de-
fine here whether to have this part of the name applied or not.
See also "4.3.1 Defining Options for Adding Boards" [ ➙ 123].
OK Applies the settings for this board.
OK to all The settings are applied for all selected boards. A new dialog box is not shown
for each board.
How to Configure a Multi Line Job
4.3.3 Board Added - Result Adding Recipes or Boards
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 125
4.3.3
4.3.3 Board Added - Result
Board Added - Result
You have added four boards. The board side is defined as top is each case. Attributes A and B are the
Other Process Requirements. No inclusive groups have been formed yet.
Result: board added
Parameter Description
Recipe Shows the recipe path and name.
Board Shows the path and the name of the board. Click on the entry to open the board
in the SIPLACE Pro Editor.
Board side Shows the top or bottom side of the board.
Board orientation Shows the position of the board in the board conveyor (0, 90, 180, 270 de-
grees).
Board length [mm] Shows the length of the board at 0 degrees orientation in the board conveyor.
Board width [mm] Shows the width of the board at 0 degrees orientation in the board conveyor.
Conveyor Shows which conveyor lane the board is in.
Number of boards Shows the overall quantity of boards for production. The Average Batch Size
value changes accordingly.
You can edit this value and enter a new production quantity. If the value is
changed, the number of panels will change also.
Number of Panels Shows the overall quantity of panels for production. The Average Batch Size
value changes accordingly.
You can edit this value and enter a new production quantity. If the value is
changed, the number of boards will change also.