00197496-01_UM_SiClusterMultiline_DE_EN.pdf - 第146页
How to Configure a Multi Line Job Defining Individual Line Settings 4.8.1 Dialog Box: Settings 146 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 4.10 4 . 1 0 D e f in in g I n d iv id u a l L in e S e t t in g …
How to Configure a Multi Line Job
4.8.1 Dialog Box: Settings Defining Recipe-Specific Cycle Times for Lines (Optional)
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 145
4.9
4.9 Defining Recipe-Specific Cycle Times for Lines (Optional)
Defining Recipe-Specific Cycle Times for Lines (Optional)
In the Cycle Times tab, you can define whether the ideal cycle times for your production line should be
supplemented by specific recipe-line cycle times. This defines the minimum cycle time for the line. You
can also define recipe-line cycle times just for individual /specific recipes.
► Go to Configuration and select the Cycle Times tab.
Tab: cycle times: defining minimum line cycle times
See also
4.8.1 Dialog Box: Settings [ ➙ 143]
NOTICE
Definition of recipe-specific line cycle times.
The definition of recipe-specific cycle times for the line is advisable if the minimum achievable
cycle times in the whole line is greater than the minimum possible cycle time for the SIPLACE
machine. In this case, the higher recipe-specific line cycle times for the line will be used for time
planning and not the optimized cycle times for the SIPLACE line.
Icon Description
1 ► Enable the Minimum line cycle times icon and the table will show the cycle times.
► Click in the relevant cell of the table and enter the required values. In the example, this
is 30 seconds for the SX_2_Start.
2 You can import these minimum line cycle times with the help of the CSV Import Wizard.
See also "9 Import Wizard for CSV Data" [ ➙ 181].
How to Configure a Multi Line Job
Defining Individual Line Settings 4.8.1 Dialog Box: Settings
146 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
4.10
4.10 Defining Individual Line Settings
Defining Individual Line Settings
You can also define individual settings for your line. These settings then influence the results calculated
by the optimization.
► Go to Configuration and select the Line Settings tab.
Tab: line settings
How to Configure a Multi Line Job
4.8.1 Dialog Box: Settings Defining Individual Line Settings
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 147
Parameter Description
Line Shows the path and the name of the line. Click on the entry to open the line in
the SIPLACE Pro Editor.
Flexible Line This option defines that the main aim of SiCluster Multiline is not applied to this
line. This means, that a larger number of required setups may exist for this line
than for the "non-flexible" lines.
The setting of a production time is, however, just as valid as for the "non-flexi-
ble" lines. This line can therefore be used as a flexible line to produce job-spe-
cific setups.
Background:
As production with fixed setups is not possible on the flexible line, the higher
number of jobs plays a less significant role. The setups with flexible lines are
in principle clustered, configured and produced on a job-specific basis for the
upcoming jobs.
Cluster Fill Level [%] For the optimization result, you can select the extent to which the free tables
are to be configured. This optimization parameter can be globally set and indi-
vidually changed in the dialog box Optimization Parameters => Cluster Param-
eters => Desired Setup Fill Level => % Free Table.
Available Production
Time [h]
This shows the total time which is available for production and conversion pro-
cedures on the line.
This parameter is important for controlling the optimization algorithms.
Utilization [%] This factor describes the proportion of the production time calculated by the
SIPLACE Pro optimization in the overall production time which is actually
needed.
The value 60, for example, means that after deducting the expected conver-
sion times, 60% of the production time available can be productively used.