00197496-01_UM_SiClusterMultiline_DE_EN.pdf - 第131页
How to Configure a Multi Line Job 4.4.3 Dialog Box: Remove Inclus ive Groups Forming Inclusive Grou ps (Optional) SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 131 Edit field: Position of designators 4.4.3 4 . …
How to Configure a Multi Line Job
Forming Inclusive Groups (Optional) 4.4.2 Dialog Box: Put Into Separate Inclusive Groups
130 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
Same job rules (inclusive groups) in the Rule Editor
► Go to Configuration and open the function Same Job Rules (Inclusive Groups).
⇨ The Rule Editor Same Job Rules will be opened.
Rule Editor: same job rules
► The available process requirements are shown at (1).
► Go to Rules defined and mark the line (2).
⇨ The result for the boards affected by the rule will be shown at Result set of the selected rule.
► See also "8 Working with the Rule Editor" [ ➙ 175].
4.4.2
4.4.2 Dialog Box: Put Into Separate Inclusive Groups
Dialog Box: Put Into Separate Inclusive Groups
Dialog box: put into separate inclusive groups
Edit field:
Parameter Description
Board side designator
for top side
Enter the designator for the top side of the board here.
(e.g. _TOP).
Board side designator
for bottom side
Enter the designator for the bottom side of the board here.
(e.g. _BOTTOM).
How to Configure a Multi Line Job
4.4.3 Dialog Box: Remove Inclusive Groups Forming Inclusive Groups (Optional)
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 131
Edit field: Position of designators
4.4.3
4.4.3 Dialog Box: Remove Inclusive Groups
Dialog Box: Remove Inclusive Groups
If the recipes in inclusive groups are only partly marked, this dialog box enables you to specify which
inclusive groups are to be deleted.
Observe the information text in this dialog box.
Dialog box: remove inclusive groups
Edit field:
Example
▪ Recipe1 and recipe2 form an inclusive group. Attribute (1)
▪ Recipe1 and recipe3 form an inclusive group. Attribute (2)
– To delete, mark recipe1 and recipe2. The Remove Inclusive Groups dialog box will appear and
attribute (1) will become white and attribute (2) will be marked yellow.
– The attributes which are not only in the marked recipes but which are also present in other reci-
pes will be marked yellow as well. If the Delete checkbox is marked with the yellow attribute, the
inclusive group will be deleted. The attribute will also be deleted but will remain in the recipes
which are not marked.
– If the attribute (2) is also marked for deletion, the inclusive group will be deleted and the attribute
removed from recipe1. However, the attribute will remain in recipe3.
Parameter Description
Begin Defines that the board side designator is to be at the beginning of the recipe
name.
End Defines that the board side designator is to be at the end of the recipe name.
Any (designator may
occur only once)
Defines that the board side designator can be at any position in the recipe
name.
Parameter Description
Delete Enable this checkbox to mark an inclusive group for deletion. Click on OK and
the marked inclusive group will be deleted.
Board side designator
for bottom side
Shows the designator for the inclusive group.
How to Configure a Multi Line Job
Editing Process Requirements for Recipes (Optional) 4.4.3 Dialog Box: Remove Inclusive Groups
132 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
4.5
4.5 Editing Process Requirements for Recipes (Optional)
Editing Process Requirements for Recipes (Optional)
You can allocate Process requirements to the recipes. See also "6 Working with Process Requirements
and Process Capabilities" [ ➙ 163].
SiCluster Multiline takes into account the process requirements by distributing boards with certain line
process requirements in SiCluster Multiline only on those lines which also have these process capabili-
ties. The rules which are defined based on the other process requirements must also be observed.
In this example, the process requirements A and B are defined. For example, the purpose of this could
be to specify that boards with the process requirement A are only produced on lines for customer A and
boards with the process requirement B are only produced on lines for customer B.
► Select one or more recipes in the multi line recipes table.
⇨ The icons for editing process requirements will be enabled.
Tab: multi line recipe: process requirements