presto_en.pdf - 第72页
Page 72 If true, t he user is asked for project n ame before it s saving. HexFile.File string Opened current file path HexFile.Present boolean HexFile.IHex boolean If true, the file with exten sion different from .HEX or…
Page 71
5.12.2 List of UP variables
Prog.LoadFileBfgProg
boolean
If true, current file is reloaded before device (or its part) is
programmed.
Prog.LoadFileBfgProgWarnMod
boolean
If true, the program warns when it is set to reload current
file before programming and data in some editor have
been manually modified.
Prog.LoadFileBfgProgWarnOnNoChange
boolean
If true, the program warns when it is set to reload current
file before programming and the content of the loaded file
has not changed from the previous programming.
File.AutoCheck
boolean
If true, current file is periodically tested for changes.
File.LoadOnModify
boolean
If true, when change is detected, question pops up.
FileLoad.ClearData
FileLoad.ClearCfg
FileLoad.ClearID
FileLoad.ClearCode
boolean
If true, the contents of code memory is erased (in UP
memory) before new file is loaded;
all cells not stored in the file will have its default (blank)
state.
Part.Name
string
Selected device name
Prog.Name
string
Selected programmer name
Possible values are PREST, FORTE.
Prog.PortBase
integer
Serial number of programmer
Prog.UseOnlyThisSN
boolean
If true, the SN saved in the up.ini is always used regardles
of the SN contained in a project file.
LanguageFile
string
Relative path to used languange file
Project.File
string
Project file path
Project.Present
boolean
Project.Template
boolean
Page 72
If true, the user is asked for project name before its
saving.
HexFile.File
string
Opened current file path
HexFile.Present
boolean
HexFile.IHex
boolean
If true, the file with extension different from .HEX or .BIN
is loaded as HEX file.
HexFile.Template
boolean
If true, the user is asked for name before saving.
HexFile.SaveVoid
boolean
If true, empty cells are saved, too.
HexFile.AskForBinEndian
boolean
If true, the user is asked if the loaded BIN file should be
loaded as Little or Big endian.
HexFile.BinLittleEndian
boolean
If true, the loaded BIN file is loaded as Little endian.
HexFile.LoadDataAuto
boolean
If true, with file is loaded also a separate file for data
memory.
HexFile.LastDataFile
string
Path of a separate file for data memory.
HexFile.DataIHex
boolean
If true, the file for data memory with extension different
from .HEX or .BIN is loaded as HEX file.
Prog.QBfrEraseFlash
boolean
Question before erasing flash devices
Prog.QBfrProgFlash
boolean
Question before programming flash devices
Prog.QBfrProg
boolean
Question before programming OTP devices
Prog.QBfrDiffProg
boolean
Question before differential programming (of flash
devices)
Prog.QBfrProgCP
boolean
Warning before programming device with some kind of
protection
Prog.CloseStatOnGoodAct
boolean
If true, status window will be automatically closed after
read/verify etc... without errors.
Prog.CloseStatOnGoodProg
boolean
Page 73
If true, status window will be automatically closed after
programming without errors.
Prog.BeepOnGoodProg
boolean
If true, program makes a sound on successful
programming.
Prog.BeepOnBadProg
boolean
If true, program makes a sound on unsuccessful
programming.
Prog.SoundsOff
boolean
If true, all sounds of the program are switched off.
Prog.SkipBlankForCfg
boolean
If true, no blank check of part is performed before
programming of configuration space.
Prog.SkipBlankCheck
boolean
If true, no blank check of device is performed before
device programming.
Prog.SkipErase
boolean
If true, no erasing is performed before device
programming.
Prog.SkipEraseData
boolean
If true, no erasing is performed before only data memory
programming.
Prog.SkipLastFFVerify
boolean
If true, verification of empty FF positions at the end of the
programmed memory is not preformed.
Prog.SkipVerify
boolean
If true, no verification is performed after programming.
Prog.DoubleVerify
boolean
If true, verification on two supply voltages is performed
after programming. Supported by FORTE with internal
supply voltage only.
Prog.DoubleVerifyV1
integer
Defines supply voltage size for the first verification, the
value is in voltsx10.
Prog.DoubleVerifyV2
integer
Defines supply voltage size for the second verification,
the value is in voltsx10.
Serial
integer
0 no serial numbers
1 serial numbers are from external file
2 serial numbers are calculated
Serial.Step
integer
Step of serial numbers
Serial.File
string