presto_en.pdf - 第74页

Page 74 File name of external file with serial numbers Serial.File.Next string Label of serial nu mber Serial.Length integer If serial num ber is comput ed, serial nu mber leng th (digits) Serial.Actual (unsigned) intege…

100%1 / 101
Page 73
If true, status window will be automatically closed after
programming without errors.
Prog.BeepOnGoodProg
boolean
If true, program makes a sound on successful
programming.
Prog.BeepOnBadProg
boolean
If true, program makes a sound on unsuccessful
programming.
Prog.SoundsOff
boolean
If true, all sounds of the program are switched off.
Prog.SkipBlankForCfg
boolean
If true, no blank check of part is performed before
programming of configuration space.
Prog.SkipBlankCheck
boolean
If true, no blank check of device is performed before
device programming.
Prog.SkipErase
boolean
If true, no erasing is performed before device
programming.
Prog.SkipEraseData
boolean
If true, no erasing is performed before only data memory
programming.
Prog.SkipLastFFVerify
boolean
If true, verification of empty FF positions at the end of the
programmed memory is not preformed.
Prog.SkipVerify
boolean
If true, no verification is performed after programming.
Prog.DoubleVerify
boolean
If true, verification on two supply voltages is performed
after programming. Supported by FORTE with internal
supply voltage only.
Prog.DoubleVerifyV1
integer
Defines supply voltage size for the first verification, the
value is in voltsx10.
Prog.DoubleVerifyV2
integer
Defines supply voltage size for the second verification,
the value is in voltsx10.
Serial
integer
0 no serial numbers
1 serial numbers are from external file
2 serial numbers are calculated
Serial.Step
integer
Step of serial numbers
Serial.File
string
Page 74
File name of external file with serial numbers
Serial.File.Next
string
Label of serial number
Serial.Length
integer
If serial number is computed, serial number length
(digits)
Serial.Actual
(unsigned) integer
If serial number is computed, actual computed serial
number (if decimal, coded as BCD)
Serial.ASCII
boolean
If serial number is computed, if true, serial number is
stored to device as ASCII characters.
Serial.SaveTo
integer
1 code/main memory
2 data memory
4 ID positions
Serial.Retlw
boolean
If serial number is computed, if true, memory cells are
filled with retlw instructions.
Serial.Addr
integer
If serial number is computed, address where to save
Serial.CPW
integer
If serial number is computed, chars per word
Serial.Base
integer
If serial number is computed, base of serial number, can
be only 10 or 16
Serial.Succ
integer
next serial number is
0 same
1 incremented
2 decremented
3 random (LSFR)
Serial.Order
integer
0 HiLo hilo
1 hilo HiLo
2 LoHi lohi
3 lohi LoHi
Serial.Write.BeforeProg
boolean
If true, current serial number is "written" into opened HEX
editors just before programming the device.
Serial.Write.AfterProg
boolean
If true, current serial number is "written" into opened HEX
editors after successful programming.
Page 75
Serial.Succ.AfterProg
boolean
If true, next serial number is generated after successful
programming.
Serial.LogSN
boolean
If true, the result of programming is logged to a selected
file.
Serial.LogFile
string
File name of a file where the result of the programming
will be logged.
ICSP.LongTime
boolean
If true, longer times for switching Vcc are taken.
ICSP.LongTime.Time.SwOn
integer
Time to wait after Vcc is switched on in microseconds.
ICSP.LongTime.Time.SwOff
integer
Time to wait after Vcc is switched off in microseconds.
SpecSettings.PREST.Power
integer
0 idle power supply is None / External
1 idle power supply is Internal 5V
SpecSettings.PREST.ProgPower
integer
0 power supply during programming is
External 2.7 to 5.5V
1 power supply during programming is
Internal 5V
SpecSettings.PREST.i2cSpeed
integer
0 100kHz
1 500kHz
2 1MHz
3 Maximal
SpecSettings.PREST.i2cAddr
integer
0 first suitable address or N/A
1 second suitable address
etc...
SpecSettings.PREST.LVP
integer
0 HVP method
1 LVP method
SpecSettings.PREST.PICAlg
integer
0 automatic selection
1 assume VDD = 5V
2 assume VDD < 5V
SpecSettings.PREST.UsePE
boolean
If true, PE (programming executive) is used for
programming of PIC MCUs.
SpecSettings.PREST.PIC32MZ_BootProg
integer