presto_en.pdf - 第99页

Page 99 13 HPRAVR HPRAVR is an opt ional accessory for PRESTO and FORTE programmers for programming AVR microcon trollers in applications wit h the ISP10PIN standard connec tor on the device's side and with the ICSP…

100%1 / 101
Page 98
12.2
HPR1V2 schematics
Fig.31: HPR1V2 schematics
12.3
Technical specification
min.
max.
V
CC
supply voltage
1.2
3.3
V
V
IH
input pin voltage log.1
0.65xV
CC
V
V
IL
input pin voltage log.0
0.35xV
CC
V
I
OUT
output pin current
4
mA
Table14: Technical specification
Page 99
13
HPRAVR
HPRAVR is an optional accessory for PRESTO and FORTE
programmers for programming AVR microcontrollers in
applications with the ISP10PIN standard connector on the
device's side and with the ICSPCAB8 cable on the
programmer's side. The ISP10PIN connector is typically
used on boards with microcontrollers of the AVR type
such as STK500, for example.
13.1
Usage
Connect the HPRAVR adapter to the application's
connector. Make sure that pin 1 of the HPRAVR adapter is
connected to pin 1 of the ISP10PIN connector in the
application (Pin1 is marked with a red dot at HPRAVR
while it may be marked in different ways on the
connected application – see information in the
corresponding manual).
Now interconnect the adapter and FORTE with an ICSP
cable. Pin2 in the cable is used as the key. The following
picture illustrates a typical interconnection of the PRESTO
programmer with an application through the HPRAVR
adapter:
Fig.32: Use of HPRAVR
Important Warning
Pin No.1 of the HPRAVR adapter is marked
with red color. Please double check the
position of the pin No.1 in the application as
the application could be damaged if
incorrectly connected.
Fig.33: ISP10PIN, top
view
Fig.34: HPRAVR adapter diagram
Page 100
14
Document history
Document
revision
Modifications made
2013-07-03
Newly created document
2013-12-18
Minor text corrections
2014-02-28
New command line parameter [/read]
2014-07-01
CE certificate was replaced by Declaration of
Conformity.
2014-09-23
Fixed I2C memory example picture.
Described new option - Show only the lowest byte of
word in ASCII
2014-11-21
Updated list of variables for up_dll.dll
2014-11-25
New settings of the UP program have been added.
2015-02-03
Added View/Console menu description.
Added description of PIC32MZ_BootProg variable.
Small text fixes.
2015-03-12
The name of item Delay for VDD switching on/off
has been changed
Added description of the checksum settings
2015-04-07
Updated description how to create SVF file for
Lattice.
2015-05-19
Definition of input voltage on pins was added.
Description of w=32 parameter for Windows
messages was added.
2015-08-05
Description of the programmer driver installation
has been changed.
Added new /getpartrev parameter.
Added new commandline errorcodes.
2015-09-21
Added description of the setting of the warning
when the loaded file is not aligned to a word size.
Fixed links.
2015-11-19
Added description of setting of the T pin during and
after programming.
2016-01-22
The serial numbers logging description has been
updated.
2016-03-08
Added description of the Display programmer form
function.
Added description of the setting which disables the
VPP before VCC warning.
2016-05-20
The PE description has been updated.
Added description of the start and end address for
the SPI Flash memories.
2016-10-10
Added description of the /sn commandline
parameter and manual serial numbers description.
Added the commandline error code 9 description.
2016-12-15
Description of usage of the programmers at Linux
has been added.
2017-02-02
Added a table with recommended values of Rs for
ZDs, under PIC connections picture.
Added description of auto programming in the Mass
production window.
Added description of Keep manually modified data.
2017-02-10
The Linux driver instalation chapter has been
completed.
2017-03-13
A link to lin_ftd2xx has been added.
2017-03-23
Added description of /q1 commandline parameter.
2017-05-09
Added description of "Load last project on start-up"
option.
2017-06-29
Added chapter about MultiUP utility.
2017-10-30
Added description of "When using Windows
Messages disable other warnings" option.
Added description of "Write checksum to log file"
option.
2018-02-19
The HPR chapters have been completed and
moved.
2018-03-28
Added description of "Device info" menu item.
2018-05-17
Added description of Renesas RX600 settings.