EUS0153210_YFact_Standard_E.pdf - 第107页

2-73 2 Board Explorer 4. Whenanerrornotacceptabletorestoreautomaticallyoccurs,thefollowingerrordialogsaredisplayed. Specifythedatatodeleteandclickthe[OK]button. Error dialogs Number repetition err…

2-72

Board Explorer

8.2 Update of File Table

1.Itright-clicksinthelineofthetreebytheBoardExplorer,and“UpdateFTABLE”isselected.

Update FTABLE

64262-S0-00

2.Whentheerrorisfound,thefollowingwarningdialogmessageisdisplayed.

Warning dialog message

64263-S0-00

 WhentheOKbuttonispressed,theautomaticrestorationprocessingisexecuted.

Whenthecancellationbuttonispressed,“UpdateFTABLE”isinterrupted.

It is also possible that the line folder in preparation for the emergency backs up. It backs up afterwards

because an automatic restoration can be canceled by pressing the cancellation button.

“Update FTABLE” is executed again after the backup is completed, and it restores it.

3.Whentheerrorisfound,itiscorrectedautomaticallywhenitisanerrorthatcanberestoredautomatically.

2-73

Board Explorer

4.Whenanerrornotacceptabletorestoreautomaticallyoccurs,thefollowingerrordialogsaredisplayed.

Specifythedatatodeleteandclickthe[OK]button.

Error dialogs

Number repetition errorName repetition error

64264-S0-00

* The update processing ends after a while when the error is not found or an error not acceptable to restore

automatically doesn't exist.

*When“UpdateFTABLE”processingends,thefollowingalertmessagemightbedisplayed.

 Pleaseexecute“Machinere-registration”byusingacorrectsystemdatadiskofthemachineinthatcase.

Afterwards, please execute “File table update” again.

Update FTABLE completed

64265-S0-00

*Pleasereferto“8.3Abouttheerrorkindandmethodoftherestoration”fortheerrorcontentandmethodof

the restoration.

2-74

Board Explorer

8.3 About the error kind and method of the restoration

What is the name repetition error......?

•Two or more Board data of the same name exist in one machine.

•Or, the Board data of the same name exist in a different Board number between machines.

Itbecomesanamerepetitionerrorwhenapplyingtotwoabove-mentionedscases.

Method of restoring name repetition error

•WhentheBoarddataofthesamenameexistsinthemachine,theBoarddatausuallyreadisleft,andtherestis

deleted.

•Whenthenameoverlapsbetweenmachines,thecorrespondenceoftheBoardnumberismeasuredanditrestoresit.

What is the number repetition error......?

•Two or more Board names exist in one Board number.

Itbecomesanumberrepetitionerrorwhenapplyingtotheabove-mentionedcase.

Method of restoring number repetition error

•The overlapping Board data is moved to the Board number that has become empty.

The Board data is not deleted.

However, it is necessary to delete either data if the board data cannot be moved (in case of maximum number of VIOS

boards).

The method of selecting the deleted Board data is the same as a past method.

* The Board number is a number treated internally in the management of the VIOS Board.