EUS0153210_YFact_Standard_E.pdf - 第187页

4-12 4 Feeder Viewer 4. [Plan Info] button Displays the setup information on feeders, tray changer or wafer tray changer used with each machine, by retrieving it from the board data in the production board list. Referenc…

100%1 / 238
4-11
4
Feeder Viewer
2. [Tray changer layout] button
Displays the tray changer layout used with each machine, by retrieving tray setup information from the board data in the
production board list.
The pallet that holds the parts selected in the upper grid is graphically displayed.
Reference
The [Tray changer layout] button has the same function as the "Tray changer layout" command in the View menu.
Tray changer layout
Tray parts setup information
Tray parts setup information list
Tray changer layout Pallet layout
64415-S0-00
3. [Wafer tray changer layout] button
Displays the wafer tray changer layout and wafer layout.
Reference
The [Wafer tray changer layout] button has the same function as the "Wafer tray changer layout" command in the
View menu.
Wafer tray changer layout
Wafer tray setup information
Wafer tray parts setup information list
Wafer tray changer layout Wafer layout
64416-S0-00
4-12
4
Feeder Viewer
4. [Plan Info] button
Displays the setup information on feeders, tray changer or wafer tray changer used with each machine, by retrieving it
from the board data in the production board list.
Reference
The [Plan info] button has the same function as the "Plan info" command in the View menu.
Plan information screen
Feeders
Parts setup information
Feeder setup layout
64417-S0-00
5. [Plan list] button
Displays the list of feeder setups, tray changer setups or wafer tray changer setups.
Reference
The [Plan list] button has the same function as the "Plan list" command in the View menu.
Parts setup information screen
64418-S0-00
4-13
4
Feeder Viewer
6. [Plan layout] button
Displays the layout of feeder setups, tray changer setups or wafer tray changer setups.
Reference
The [Plan layout] button has the same function as the "Plan layout" command in the View menu.
Setup layout screen
Feeders
Machine name, number of parts whose feeder set position is unspecified,
and total number of mounting points are shown in the center of the layout.
64419-S0-00
7. [Interference check] button
Checks whether the feeder positions interfere with a moving part in each machine.
If feeders that might cause interference are found, a dialog box appears to show a list of those feeder set positions.
(Feeder positions on all machines are checked.)
Reference
The [Interference check] button has the same function as the "Execute interference check of feeder" command in
the View menu.
Dialog box showing results of feeder interference check
64420-S0-00
Whenyouclickthe[OK]buttonintheabovedialogbox,thefeederpositionsthatmaycauseinterferenceareshownin
red on the feeder setup layout.
n
NOTE
This interference check also confirms the feeders where no head can reach.