YG12_英文保养手册.pdf - 第14页
viii Safety instructions 2.2.3 Facilities and environmental condition When you see the follo wing cautions or warnings, alwa ys read them thoroughly and make sure you fully understand them. w W ARNING …
vii
Safety instructions
2.2.2 Operation and handling precautions
When you see the following cautions or warnings, always read them thoroughly and make sure you fully
understand them.
c
Always stop the machine before installing the parts feeder into the machine. Hands or other parts of your body might
otherwise be caught in the moving parts.
c
c
Always turn off the power with the correct procedure. Using hasty or incorrect procedures to turn off power might
damage the flash disk in the machine.
c
When installing push-up pins on the push-up plate, set them in positions where they will not interfere with the conveyor
rails or other parts when the push-up plate is raised.
c
When the machine you are using is not equipped with a nozzle station, you must change the nozzle by hand if it is not
c
it.
w
WARNING
w
WARNING
w
WARNING
c
When storing the grease after use, tightly close the cap of the grease tube or container to prevent dust and moisture
c
After copying board data or system data into a USB memory device, do not leave that data in the USB memory device
for a long time. Use the USB memory device just as a copy medium for backup data. Prepare other backup media
viii
Safety instructions
2.2.3 Facilities and environmental condition
When you see the following cautions or warnings, always read them thoroughly and make sure you fully
understand them.
w
WARNING
w
WARNING
w
WARNING
w
WARNING
w
WARNING
ix
Safety instructions
3. Warning labels and attachment positions
To use the YAMAHA machines safely and correctly, warning labels are attached to the machine body and
peripheral equipment. Check that the information on each warning label is clearly legible and comply with
the instructions.
3.1 Warning labels
3.1.1 Handling of safety covers
n
Warning instruction
w
WARNING
n
Applicable machines All YS, Xg and YG series machines, tray changer, etc.
Risk of injury
Safety cover
93001-LW-00
n
Warning instruction
w
WARNING
n
Applicable machines All YS, Xg and YG series machines, tray changer, etc.
WARNING
Do not touch this switch!
Machine movement may cause injury
Risk of injury
Safety cover switch
93002-LW-00