YG12_英文保养手册.pdf - 第25页
xix Safety instructions 3.3 Label positions T he following warning/caution labels are attac hed to the Y AMAHA products to ensure safe and correct use. Check that the information on eac h label is clearly legible and com…
xviii
Safety instructions
n
Caution instruction
c
n
Applicable machines All YG series machines
Close cover before operating FDD or USB memory drive
93K41-000530
n
Caution instruction
c
machine or cause faulty operation.
n
Applicable machines All machines
AC208V INPUT
Use correct voltage
93118-LC-00
xix
Safety instructions
3.3 Label positions
The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
Warning/caution labels
YS12 front side
N Open/close cover
N Open/close cover
N Conveyor opening (right and left sides)
N Open/close cover (safety cover)
inner side
N Feeder setup section
N Panel inner side
N Cutter duct section
N Cutter section
N Lower panels and
panel inner side
93201-L5-00
xx
Safety instructions
n
Label positions
Warning/caution labels
YS12 rear side
N Open/close cover
N Open/close cover
N Open/close cover (safety cover)
N Feeder setup section
N Lower panels
N Conveyor opening
N Cutter section
N Cutter duct section
93202-L5-00