00193922-01.pdf - 第172页
4 Setting up and commissioning User Manual SIPLACE HF Series 4.5 Setting up the placement machine Software Version SR.505.x x 05/2004 US Edition 172 4.5.6 Fitting the input conveyor 4.5.6.1 T ools – Allen keys, DIN 91 1,…
User Manual SIPLACE HF Series 4 Setting up and commissioning
Software Version SR.505.xx 05/2004 US Edition 4.5 Setting up the placement machine
171
4.5.5 Fitting the extension kits to the machine frame
4.5.5.1 Fitting the extension kit on the PCB input side
When the placement machine is delivered, the extension kits on the PCB input side and PCB input
conveyor are dismantled. The procedure for attaching the extension kit to the PCB input side is
as follows:
– Fitting the input conveyor
see Section 4.5.6, page 172
– Fitting the extension kit on the PCB input side see Section 4.5.7, page 174
– Installing the computer unit on HF and HF/3 see Section 4.5.8, page 178
– Installing the axis unit on the HF and HF/3 see Section 4.5.12, page 192
– Fitting the main fault indicator see Section 4.5.13, page 196
– Integrating the placement machine into the line see Section 4.5.14, page 196
– Making final adjustments to the placement machine see Section 4.5.15, page 200
4.5.5.2 Fitting the extension kit on the PCB output side
If the extension kit on the PCB output side was also removed for ease of transportation, you will
have to carry out the following steps before integrating the placement machine into the line (see
Section 4.5.14
, page 196):
– Fitting the output conveyor
see Section 4.5.10, page 186
– Fitting the extension kit on the PCB output side see Section 4.5.11, page 188
– Installing the axis unit on the HF and HF/3 see Section 4.5.12, page 192
– Fitting the main fault indicator see Section 4.5.13, page 196
– Integrating the placement machine into the line see Section 4.5.14, page 196
– Making final adjustments to the placement machine see Section 4.5.15, page 200
4 Setting up and commissioning User Manual SIPLACE HF Series
4.5 Setting up the placement machine Software Version SR.505.xx 05/2004 US Edition
172
4.5.6 Fitting the input conveyor
4.5.6.1 Tools
– Allen keys, DIN 911, set
– Phillips screwdriver, size 1
4.5.6.2 Assembly
4
Fig. 4.5 - 6 Input conveyor - dual conveyor
4
(1) Input conveyor, panel
(2) Processing conveyor 1, panel
(3) Cable cover 20 x 200
(4) Countersunk screw, ISO 7046, M3x6, 2x per cable cover
(5) Cable cover 20 x 310
(6) Fillister head screw DIN 912, M3x5, 1x per cable cover
(7) Fillister head screw DIN 912, M6x16, and washer, 4x per panel
(8) Guide for hexagonal shaft
User Manual SIPLACE HF Series 4 Setting up and commissioning
Software Version SR.505.xx 05/2004 US Edition 4.5 Setting up the placement machine
173
Æ Remove the cable covers (items 3 and 5 in Fig. 4.5 - 6) from the panels (item 1 in Fig. 4.5 - 6)
of the output conveyor.
Æ Carefully place the panel (item 1 in Fig. 4.5 - 6) against the panel on the processing conveyor
(item 2 in Fig. 4.5 - 6
).
CAUTION 4
Be careful not to cut through any of the light barrier or drive motor cables.
Æ Fix each panel using 4 fillister head screws M6x16 and the associated washers (item 7 in Fig.
4.5 - 6
).
Æ Connect the power cable to the light barriers and drive motors.
Æ Fix the cable covers in place (item 3 and 5 in Fig. 4.5 - 6).