00193922-01.pdf - 第257页
User Manual SIPLAC E HF Series 6 Component han dling Software Vers ion SR.505.xx 05/2004 US Edition 6.3 Component trolley 257 PLEA SE NOT E: At exter nal set-up position s, yo u will need a n externa l power s upply fo r…
6 Component handling User Manual SIPLACE HF Series
6.3 Component trolley Software Version SR.505.xx 05/2004 US Edition
256
6.3 Component trolley
Up to four component trolleys may be docked to the SIPLACE HF placement machine. The loca-
tions are numbered as shown in the diagram below.
Fig. 6.3 - 1 Locations for the component trolleys
1, 2, 3, 4 Location no. 1, 2, 3, 4
T Direction of PCB transport
The component trolleys are stand-alone modules that can be set up at an external set-up area
with feeders. This means that the production process only has to be interrupted briefly in order to
change the component trolley.
User Manual SIPLACE HF Series 6 Component handling
Software Version SR.505.xx 05/2004 US Edition 6.3 Component trolley
257
PLEASE NOTE:
At external set-up positions, you will need an external power supply for the component trolley
(see section 6.3.5, page 264).
Fig. 6.3 - 2 Component trolley with a PCB transport height of 950 mm
6
The design places considerable emphasis on ergonomics and safe operation.
– The trolleys move easily.
– No cables have to be plugged in to supply the component trolleys with power and compressed
air. The same applies to the communication interface.
– The component trolley is docked in/out the machine using a docking unit. A description of this
device can be found in chapter 5
section 5.9 from page 225 onward. It is integrated into the
safety, supply and communication circuit or is disconnected from this circuit. Electronic prox-
6 Component handling User Manual SIPLACE HF Series
6.3 Component trolley Software Version SR.505.xx 05/2004 US Edition
258
imity switches signal whether the component trolley has been docked in correctly.
– The component trolley is fixed so precisely to the placement machine that it is even suitable
for processing 0201 components.
– The component trolley can be adjusted to PCB transport heights of 830 mm, 900 mm, 930 mm
and 950 mm in just a few simple actions.
– The tape container can hold tape reels with a diameter of up to 15" (optional up to 19").
– Every component trolley has a unique identification number.