00193922-01.pdf - 第227页

User Manual SIPLAC E HF Series 5 Tasks on the m achine Software Vers ion SR.505.xx 05/2004 US Edition 5.9 Docking the component trolley in or out 227 Æ Press the button on the top of the h and gua rd (item 1 ) until the …

5 Tasks on the machine User Manual SIPLACE HF Series

5.9 Docking the component trolley in or out Software Version SR.505.xx 05/2004 US Edition

226

5.9.2 Docking out the component trolley

Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.

The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will

then be activated. 5

Æ Click on the desired SINGLE FUNCTIONS GANTRY X icon (gantry 1 or 2).

Æ Select GANTRY FUNCTIONS.

Æ From this menu, click on the GO TO SET-UP POSITION button.

The selected placement head will move across the PCB transport to prevent it being dam-

aged when the component trolley is changed. 5

Æ Take hold of the protective cover by the handle and open the cover.

Fig. 5.9 - 2 Docking out the component trolley

(1) Button underneath the protective cover

(2) Button on the hand guard

User Manual SIPLACE HF Series 5 Tasks on the machine

Software Version SR.505.xx 05/2004 US Edition 5.9 Docking the component trolley in or out

227

Æ Press the button on the top of the hand guard (item 1) until the component trolley is docked out.

Æ Pull out both transport handles (item 1) on the component trolley, and swivel the handles in-

wards (see Fig. 5.9 - 3

). The handles are then locked in place.

Fig. 5.9 - 3 Component trolley - Pulling out the push handles

Æ With both hands on the handles, pull the component trolley out of the placement machine.

5.9.3 Safety instructions for moving the component trolley

WARNING

To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-

ley.

Æ Always hold the handles with both hands when you want to move the component trolley.

Æ Remember that a component trolley with the full complement of feeders can tip over sideways

or forward on gradients of 20° or more.

Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.

Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast enough.

5 Tasks on the machine User Manual SIPLACE HF Series

5.9 Docking the component trolley in or out Software Version SR.505.xx 05/2004 US Edition

228

5.9.4 Docking in the component trolley

CAUTION

Check that the placement head is outside the range of the component trolley.

Æ Press the two buttons on the hand guard at the same time (items 1 and 2 in Fig. 5.9 - 2, page

226

) until the trolley is fully docked in.

Æ Swivel the handles up (item 1 in Fig. 5.9 - 3) and allow the handles to slide into the component

trolley. They will first engage approximately 6 cm before the end position.

Æ Release the lock by pressing the push-button (item 2 in Fig. 5.9.3). The handles will then slide

into their end position.

Æ Close the protective cover.

Fig. 5.9 - 4 Component trolley - Sliding in the handles

(1) Turn the handles

(2) Release the lock