00193922-01.pdf - 第45页

User Manual SIPLAC E HF Series 2 Operational safety Software Vers ion SR.505.xx 05/2004 US Edition 2.3 Laser classification 45 2.3 Las er cl assific ation 2.3.1 Laser cla ss 1 2.3.1.1 Classifi cation of the whole machine…

100%1 / 358
2 Operational safety User Manual SIPLACE HF Series
2.2 Warning labels Software Version SR.505.xx 05/2004 US Edition
44
2.2.10 Warning label W208 "Laser class 2" on the PCB conveyor
2
Warning label W208 "Laser class 2" on the PCB conveyor, item no. 03009347-01 (number per
placement system: 4)
2
2
2
Fig. 2.2 - 14 Warning label W208 "Laser class 2" on the PCB conveyor
2
2
LASER RADIATION!
Do not look into beam
laser class 2
User Manual SIPLACE HF Series 2 Operational safety
Software Version SR.505.xx 05/2004 US Edition 2.3 Laser classification
45
2.3 Laser classification
2.3.1 Laser class 1
2.3.1.1 Classification of the whole machine
2
PLEASE NOTE: 2
Modules in laser classes 1 and 1M are not identified.
2.3.1.2 Classification of the camera systems
2
2.3.2 Laser class 1M
Do not look directly at this with optical instruments!
2
2
All installed camera systems and the whole machine when ready for
operation are assigned to laser class 1.
The laser classes are determined according to DIN EN 60825-1:2001.
2
The following camera systems are assigned to laser class 1:
– Multicolor PCB camera (type 18) 21
– Component vision camera for the SIPLACE TwinHead
Stationary component vision camera P&P (type 22) 50 x 40
Stationary component vision camera P&P (type 20) 8 x 8
2
The following camera systems are assigned to laser class 1M:
– 24 x 24 component camera on the 12-segment Collect&Place head
– 39 x 39 component camera on the 6-segment Collect&Place head
– 16 x 16 DCA camera on the 6-segment or 12-segment Collect&Place head
2 Operational safety User Manual SIPLACE HF Series
2.4 Safety instructions for transporting the machine Software Version SR.505.xx 05/2004 US Edition
46
2.3.3 Laser class 2
The following modules are assigned to laser class 2:
– Laser light barrier, placement area 1 in the PCB conveyor
– Laser light barrier, placement area 2 in the PCB conveyor
– Circuit-board barcode reader
2
2.4 Safety instructions for transporting the machine
2
Use a fork-lift truck with the following specification to carry the machine:
Fork length: min. 1800 mm
Carrying power: min. 6000 kg
Clear width between forks: min. 350 mm 2
WARNING
RISK OF TIPPING 2
If the required specification cannot be applied to the fork-lift, there is a risk that the fork-lift will tip
over when carrying the placement machine.
Transporting the placement machine is described in chapter 4, section 4.3, page 148.
2
Laser radiation
Do not look into beam!