PPS Pro version 8.2.pdf - 第163页
4022 591 98 247 U ser Manual 05.07 P PS-Pro v8.2 159 Guidelines for using PPS-Pro Follow i ng p i ct u re g i ves a n ove r vi ew of A X mac hi ne t yp es : FIGU RE 15 AX machin e diagr am T op view A.5.3 ACM, AQ-1 and D…
User Manual 4022 591 98247
158 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
A.5.2 AX
A.5.2.1 Head Configuration
There are two (2) types of AX machines:
■ AX Base-3 (3 sections)
■ AX Base-5 (5 sections)
For each type two (2) different PM Types (heads) exist: CompactPlacemen-
tRobot and StandardPlacementRobot. The SPR occupies 2 CPR positions and
can only be placed on the odd (1, 3, 5, etc.) positions. The Base-3 has a total
of 12 Head positions and the Base-5 has a total of 20 Head positions. Each of
the heads (PM Types) has one TEU (Toolbit Exchange Unit).
TABLE 24 AX machine head relation to Feederposition
A.5.2.2 Feederbar Configuration
For AX machine types, a ‘group’ of CompactPlacement Robot Heads and Stand-
ardPlacementRobot Heads have access to ONE feederbar: FCMII_upgrade (also
named section). A ‘group’ exists of 4 head positions.
A.5.2.3 Head Versus Feederbar Positions
This Feederbar has 44 slots on which a maximum of 24 8mm tapes fit
(TTF_08, ITF2_08). These are placed in slot: 1, 3, 5, 7, 9 and 11 in every ‘head
position bank’. Thus, it is not possible to place a 8mm feeder in slot 1 and 2 at
the same time!
A Compact Placement Robot has access to 11 slots on the FCMII_upgrade
feederbar. A Standard Placement Robot has access to 2 times 11 slots on the
FCMII_upgrade feederbar.
A base-3 machine has 3 FCMII_upgrade feederbars (3 sections). Head
positions 1-4 are section 1, head positions 5-8 are section 2 and head
positions 9-12 are section 3. The same applies to a base-5 machine, where
head positions 13-16 are section 4 and head positions 17-20 are section 5.
PM Type/Head Desc. Base-3 Base-5
CompactPlacement Robot Head with
Laser Module
1, 2, 3, …. 12
(all positions)
1, 2, 3, …. 20
(all positions)
StandardPlacement Robot Head with
Laser Module
1, 3, 5, … 11
(odd positions)
1, 3, 5, … 19
(odd positions)
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 159
Guidelines for using PPS-Pro
Following picture gives an overview of AX machine types:
FIGURE 15 AX machine diagram Top view
A.5.3 ACM, AQ-1 and D9
A.5.3.1 Head Configuration
An ACM machine can have 2 heads (Single Sided) or 4 heads (Double Sided).
An AQ-1-module and D9 machine are always Single Sided meaning they have 2
heads on the front side of the machine. A Double Sided ACM has also 2 heads
on the rear side of the machine. The heads are just numbered 1 and 2 for a
Single Sided machine and 1, 2, 3, and 4 for a Double Sided Machine.
TABLE 25 Number of heads for ACM, AQ-1 and D-9
Head ACM AQ-1 D9
1, 2 (Single Sided) X X X
1, 2, 3, 4 (Double Sided) X - -
User Manual 4022 591 98247
160 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
A.5.3.2 Feederbar Configuration
The maximum amount of feederbars these machines can have is 4 (double
sided ACM; Feederbar 1-4). An AQ-1-module and D9 machine are always single
sided, thus have 2 feederbars (1 and 2).
For the ACM and D9 machine this feederbar can either be a:
FeederTrolley - A moveable feederbar with 25 slots on which a maximum of
25 8mm tapes fit (ITF2_08).
FeederBank1 - A fixed feederbar with 25 slots on which a maximum of 25
8mm tapes fit (ITF2_08).
TrayTrolley1 - A moveable feederbar which has 50 pallets. In each pallet a
maximum of 2 trays can be defined.
TrayPallet1 - A fixed feederbar which has 1 pallet. In this pallet a maximum of
2 trays can be defined.
For the AQ-1 this can either be an ACM_Feeder_Bank, ACM_Feeder_Trolley,
ACM_Tray_Pallet or ACM_Tray_ Trolley.
ACM_Feeder_Trolley - A moveable feederbar with 25 slots on which a
maximum of 25 8mm tapes fit (ITF2_08).
ACM_Feeder_Bank - A fixed feederbar with 25 slots on which a maximum of
25 8mm tapes fit (ITF2_08).
ACM_Tray_Trolley - A tray trolley which has 48 pallets. In PPS on each pallet a
maximum of 2 trays can be defined.
ACM_Tray_Pallet - A fixed pallet. In PPS a maximum of 2 trays can be defined
on it.