PPS Pro version 8.2.pdf - 第87页
4022 591 98 247 User Manual 05.07 PPS-Pro v8.2 83 PPS-Pro GUI Nozzle Number used O2I2 1 O2I4 3 An exampl e of a .nzl fil e for an FCM with 16 Laser Pla cemen t Modul es is given belo w: Nozzle Setup Report Machin e: &quo…
User Manual 4022 591 98247
82 PPS-Pro v8.2 05.07
PPS-Pro GUI
2.37 Step 6: Perform a calculation using the constraint
file
■ Save the constraints as an .lcf file
Before a calculation can be done with the specified constraints, it has to be
saved as an lcf file (Limitations Constraint File). After that, the lcf file can be
used in the project.
■ Select the lcf file in the project.
To specify the lcf-file, go to the Program Machines tab, select one of the
machines in the applicable cell (this means that these limitations are set per
cell in the line and not for the entire line) and press the
Settings button. In
the General controls frame click the
Modify button. The Assembléon
Optimizer MPG General Controls window appears. In the Machine specific
frame click the
Settings button. Specify the lcf file in the Limitations
Constraint File textbox. Use the Browse... button to browse to the lcf file. Now
the lcf file with all its constraints will be taken into account during the opti
-
mization.
2.38 Reports and Listings
After a successful calculation, several useful reports and listings are
generated. In the next paragraphs an overview of some reports and listings is
given.
2.39 Nozzle setup information (.nzl)
This contains all information on the nozzle setup of the machine it belongs
to. For combined product calculations the information in the .stp files covers
the setup information for all calculated products.
Below is an example of a .nzl file for an ACM with TEU.
Nozzle Setup Report
Machine: "ACM_with_TEU"
Head Number Head Type Nozzle
TEU Number Nozzle
2 O2I2
2 O2I4
2 O2I4
2 O2I4
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 83
PPS-Pro GUI
Nozzle Number used
O2I2 1
O2I4 3
An example of a .nzl file for an FCM with 16 Laser Placement Modules is given
below:
Nozzle Setup Report
Machine: "FCM-II-16LAS"
PM Number PM Type Nozzle
1 LASER 4720
2 LASER 4720
3 LASER 4720
4 LASER 4720
5 LASER 4720
6 LASER 4720
7 LASER 4720
8 LASER 4720
9 LASER 4720
10 LASER No_Nozzle
11 LASER No_Nozzle
12 LASER 4730
13 LASER 4730
14 LASER 4730
15 LASER 4730
16 LASER 4730
Nozzle Number used
4720 9
No_Nozzle 2
4730 5
An example of an .nzl file for an AX Base 5 with 20 (Compact) Placement
Robots is given below:
Nozzle Setup Report
Machine: "M-AX5_20"
User Manual 4022 591 98247
84 PPS-Pro v8.2 05.07
PPS-Pro GUI
Head Number Head Type Nozzle
Head Number TEU Number Nozzle
1 1 L2, L3, L4, L5, L6, L7, L8
2 1 L2, L3, L4, L5, L6, L7, L8
3 1 L2, L3, L4, L5, L6, L7, L8
4 1 L2, L3, L4, L5, L6, L7, L8
5 1 L2, L3, L4, L5, L6, L7, L8
6 1 L2, L3, L4, L5, L6, L7, L8
7 1 L2, L3, L4, L5, L6, L7, L8
8 1 L2, L3, L4, L5, L6, L7, L8
9 1 L2, L3, L4, L5, L6, L7, L8
10 1 L2, L3, L4, L5, L6, L7, L8
11 1 L2, L3, L4, L5, L6, L7, L8
12 1 L2, L3, L4, L5, L6, L7, L8
13 1 L2, L3, L4, L5, L6, L7, L8
14 1 L2, L3, L4, L5, L6, L7, L8
15 1 L2, L3, L4, L5, L6, L7, L8
16 1 L2, L3, L4, L5, L6, L7, L8
17 1 L2, L3, L4, L5, L6, L7, L8
18 1 L2, L3, L4, L5, L6, L7, L8
19 1 L2, L3, L4, L5, L6, L7, L8
20 1 L2, L3, L4, L5, L6, L7, L8
Nozzle Number used
L5 20
L7 20
L2 20
L3 20
L6 20
L8 20
L4 20