00191297-02.pdf - 第408页
12 Station Extensions - Software User Manual SIPLACE S-23 HM 12.2 GEM Interface Software Version SR.405.xx 05/99 Issue 406 The dis play ar ea is su bdivi ded in to separate f ields whi ch contain the tool s neces sary to…
User Manual SIPLACE S-23 HM 12 Station Extensions - Software
Software Version SR.405.xx 05/99 Issue 12.2 GEM Interface
405
NOTE
Depending on the selected action, the corresponding placement program must be available at the
station computer or the host computer.
To download a placement program, the control mode must be set to "GEM Host" (see section
12.2.2.1). 12
È Enter the name of the required placement program in the box "Placement Program ID:".
È Click the corresponding button to "upload" or "download" the corresponding placement pro-
gram.
The action is performed and the current status of the action is displayed above the buttons.
12.2.2.7 Messages
È In the "State" view, click the button.
The user interface switches to the following view.
12
Fig. 12.2 - 6 "Messages" view
12
12 Station Extensions - Software User Manual SIPLACE S-23 HM
12.2 GEM Interface Software Version SR.405.xx 05/99 Issue
406
The display area is subdivided into separate fields which contain the tools necessary to perform
the actions described below. 12
"Host message" Display Field 12
This display field displays the messages received from the host computer.
The last message to be received appears at the bottom of the message list. 12
È Once you have read the message, click the Acknowledge button. Confirmation is then sent
to the host computer that the message has arrived and been read.
"Operator message" Display Field 12
In this field you can enter the messages which are to be sent to the host computer. 12
È Enter the required message (max. 160 characters).
È Click the Send button.
The message is now sent to the host computer.
NOTE
The last message to have been written and sent to the host computer is always displayed in the
text box. 12
Users Manual SIPLACE S-23 HM 13 Software Installation
Software Version SR.405.xx 05/99 Issue 13.1 General definitions
407
13 Software Installation
13.1 General definitions
13.1.1 Initial installation
This is the term used to describe the first time the station software is installed on the computer
system of the SIPLACE S-23 HM. During this installation, sample machine data is installed on the
station computer’s hard disk in addition to the individual "SC" (station computer) and "MC"
(machine controller) software components. 13
13.1.2 Update
If an initial installation has already been performed and a more recent release of the station
software has to be installed, this is known as an "update". When an update is performed, the
stored machine data is not overwritten!
The release is identified by the last two digits of the software version designation.
Example
SR.405.01 SR = system component 405 = version number 01 = release
(station computer)
NOTE
Software versions with recent releases are debugged versions.
They are NOT functionally different from software versions with older releases and are generally
compatible with them.
13.1.3 Upgrade
The installation of a software version with a higher version number than an already installed
software version is known as an "upgrade".
When an upgrade is performed, the machine data is retained and automatically converted to the
new data format if necessary.
The functionality of the station software is identified by the three-digit number (version number)
of the complete software version designation.