00191297-02.pdf - 第60页

2 Operational Safety User Manual S-23 HM 2.1 Safety instructions Software Version SR.405.xx 05/99 Issue 60 Key to Fig. 2.1 - 5 (1) Recesse d gri ps for openi ng and cl osin g the prote ctive (2) Protective cover (3) Moni…

100%1 / 422
User Manual S-23 HM 2 Operational Safety
Software Version SR.405.xx 05/99 Issue 2.1 Safety instructions
59
2.1.7 Safety instructions for opening the protective covers
To prevent any risk of injury when the protective covers on automatic placement machines are
opened, the owner must instruct his operators to use the protective covers exactly as specified in
the following description. 2
RISK OF TRAPPING FINGERS IF THE PROTECTIVE
COVERS ARE OPENED OR CLOSED INCORRECTLY
When you open the protective covers, if you place one hand in one of the
recessed grips (1) and place the other hand on the protective cover in order to
guide it (item (5) in Fig. 2.1 - 5), you risk trapping your fingers in the narrow gap (4) between the
monitor traverse (3) and the protective cover (2). 2
2
Fig. 2.1 - 5 Protective covers on the SIPLACE automatic placement machine
2 Operational Safety User Manual S-23 HM
2.1 Safety instructions Software Version SR.405.xx 05/99 Issue
60
Key to Fig. 2.1 - 5
(1) Recessed grips for opening and closing the protective
(2) Protective cover
(3) Monitor traverse
(4) Narrow gap (between 4 and 10 mm) between
the monitor traverse and protective cover
(5) Do NOT place your hand on this surface!
Every protective cover on the automatic placement machine has two recessed grips (1). 2
PLEASE NOTE
Always place both hands in these recessed grips (see item (1) in Fig. 2.1 - 6) in order to open or
close the protective covers. This “two-handed operation” will prevent any risk of injuring your
hands.
You will also avoid tilting the protective covers during opening or closing, which would place an
excessive load on the guides. 2
User Manual S-23 HM 2 Operational Safety
Software Version SR.405.xx 05/99 Issue 2.1 Safety instructions
61
2
Fig. 2.1 - 6 Two-handed operation
Key to Fig. 2.1 - 6
(1) Two-handed operation
2