FX-3RA_SPE_EN.pdf - 第34页
- 30 - 6-3-2 AT F For splicing of component feed tape (tape splicing ), this tape feeder permits a component feed during production. ( 1) Specifications ① 8 mm Product code T ape t y pe Feeding pitch Number of positionin…
- 29 -
6-3. Tape Feeder
6-3-1 CTFR
(1) List of specifications
Product
code
Tape type
Feeding
pitch
Number of
positioning pins
Diameter of
a reel
Typical
component type
Paper
Embossed
CF03HPR
○
－
2mm
Two
φ180mm
0603
CF05HPR
○
－
1005
CF08HER
－
○
Two-terminal
diode
CF081PR
○
－
4mm
1608, 2012, 3216
CF081ER
－
○
SOT
CF8L1PR
○
－
φ180 −
φ380mm
1608, 2012, 3216
CF8L1ER
－
○
SOT
CN05HPR
○
－
2mm
One
φ180mm
1005
CN08HER
－
○
Two-terminal
diode
CN081CR
○
○
4mm
φ180 −
φ380mm
1608, 2012, 3216
CN8L1CR
○
○
1608, 2012, 3216
* For a tape feeder designed for both paper and embossed paper, contact our sales
representative.
* The component size and tape specifications conform to JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
(2) Common specifications
1 Dimensions C*0***R L=602mm, H=208mm, W=16.2mm
C*8L1*R
L=683mm, H=431mm, W=16.5mm
2
Mass C*0***R 1.2kg (Excluding a reel)
C*8L1*R
1.9kg (Excluding a reel)
3
Component transport method Ratchet drive system
(3) Options
① Bar code tag
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be read
easily.
② RFID tag attachment kit
By attaching a RFID tag on CTFR feeder currently used, you can manage the feeders
with production management system.
- 30 -
6-3-2 ATF
For splicing of component feed tape (tape splicing), this tape feeder permits a component
feed during production.
(1) Specifications
① 8 mm
Product
code
Tape type
Feeding
pitch
Number of
positioning pins
Diameter
of a reel
Typical component
type
Paper
Embossed
AQ02HP
See Note 1
○
－ 2 mm
Two
φ180 mm
0402 only
AF05HP
○
－
2 mm
1005
AF08HE
－
○
Two-terminal diode
AF081P
○
－
4 mm
1608, 2012, 3216
AF081E
－
○
SOT
AN05HP
○
－
2 mm
One
1005
AN08HE
－
○
Two-terminal diode
AN081P
○
－
4 mm
1608, 2012, 3216
AN081E
－
○
SOT
Note1: This tape feeder does not support splicing.
* For a tape feeder designed for both paper and embossed paper, contact our sales
representative.
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
② 12 mm to 24 mm
Product code Feed pitch
Pick position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss depth
AF121S
4 mm
132 mm
8.3 mm or less
17 mm or less
AF122S
8 mm
AF123S
12 mm
AF12FS
4/8/12 mm
AF12NS
4/8/12 mm
AF161S
4 mm
12.2 mm or less
AF162S
8 mm
AF163S
12 mm
AF16FS
4/8/12/16 mm
AF16NS
4/8/12 mm
AF242S
8 mm
20.2 mm or less
AF243S
12 mm
AF244S
16 mm
AF245S
20 mm
AF246S
24 mm
AF24FS
8/12/16/20/24
mm
AF24NS
8/12 mm
AF24FS-OP
8/12/16/20/24
mm
114 mm
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
- 31 -
(2) Common specifications
8 mm 12 mm/16 mm 24 mm
1 Dimensions L=645 mm,
H=213 mm
W=16.8 mm
L=693 mm,
H=472 mm
W=31.5 mm
L=693 mm,
H=472 mm
W=40 mm
2
Mass (Excluding a reel) 1.8 kg or less 2.45 kg or less 2.6 kg or less
3 Component transport method Ratchet drive system
(3) Options
① Bar code tag (8 mm only)
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be read
easily.
② Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss component
made of a soft and fragile material, this spacer is installed in the emboss groove of the
feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24 mm
feeder are available.
③ Joint tape splicing jig (8 mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape with
glue easily.
④ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
⑤ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
・Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
・Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).
⑥ RFID tag attachment kit
By attaching a RFID tag on a ATF feeder currently used, you can manage the feeders
with production management system.