FX-3RA_SPE_EN.pdf - 第37页
- 33 - ② F TFR (32 mm, 44 mm, and 56 mm) Product code Feed pitch Pick position (Y directi on) Applicable component emboss wid th Applicable component emboss depth FF323R 12 mm 132 mm 23.5 mm or less 25 mm or less FF324R …
- 32 -
6-3-3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, and 24 mm)
Product code Feed pitch
Pick position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss depth
FF121S
4mm
132mm
8.3mm or less
6.5mm or less
FF122S
8mm
FF123S
12mm
FF12FS
4/8/12mm
FF12NS
4/8/12mm
FF161S
4mm
12.2mm or less
FF162S
8mm
FF163S
12mm
FF16FS
4/8/12mm
FF16NS
4/8/12mm
FF242S
8mm
20.2mm or less 10.5mm or less
FF243S
12mm
FF244S
16mm
FF245S
20mm
FF246S
24mm
FF24FS
8/12/16/20/24mm
FF24NS
8/12mm
Dimensions
FF12**
L =693mm , H =472mm , W=31.5mm
FF16**
L =693mm , H =472mm , W=31.5mm
FF24**
L =693mm , H =472mm , W=40.0mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg
Component transport
method
Ratchet drive system
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
- 33 -
② FTFR (32 mm, 44 mm, and 56 mm)
Product code Feed pitch
Pick
position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss
depth
FF323R 12 mm
132 mm
23.5 mm or less
25 mm or
less
FF324R
16 mm
FF32FR 8/12/16/20/24 mm
FF32FR-OP 8/12/16/20/24/28/32 mm 114 mm
FF443R
12 mm
128 mm
33.8 mm or less
FF444R 16 mm
FF44FR 8/12/16/20/24 mm
FF44FR-OP 8/12/16/20/24/28/32/36/40/44 mm 114 mm
FF564R 12/16 mm 128 mm
46.0 mm or less
FF568R 12/16/20/24/28/32 mm 114 mm
FF56FR 8/12/16/20/24 mm 128 mm
FF56FR-OP 8/12/16/20/24/28/32/36/40/44/48/56 mm 114 mm
Dimensions
L =693 mm, H =472 mm
W= FTFR32**:47.7 mm, FTFR44**:61.6 mm, FTFR56**:66.0 mm
Mass
(Excluding a
reel)
FTFR32**:3.2 kg, FTFR44**:3.5 kg, FTFR56**:3.8 kg
Component
transport
method
Ratchet drive system
* For the component size or tape specifications, follow the JIS C0806-3:1999, IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system. .
(2) Options
① Emboss spacer (FTFR only)
When the component width and length are large and the tape depth is small, the posture
stability at component pickup can be improved by placing the spacer at the component
pickup position of the tape feeder.
The usable emboss depth is 1.0 mm to 8.0 mm.
② RFID tag attachment kit
By attaching a RFID tag on a FTF/FTFR feeder currently used, you can manage the
feeders with production management system.
* RFID tag cannot be attached on the old type of the FTF feeder.
For further advice, contact JUKI or the representative office in your area.
- 34 -
6-3-4 Tape feeder for electric bank
The electrical tape feeder, ETF, can feed components more stably without being affected by
vibration since a motor drives it. In addition, ETF allows you to splice the component tape
and to change the feed pitch easily; which provides the higher feeder utilization rate
compared with the existing mechanical feeder.
(1) Component specifications
Product
code
Tape type
Feed pitch
Applicable
components
Width
Applicable
component emboss
depth
Remarks
Paper Emboss
EF02HS
○ －
2mm
8mm
None
0402
～
1005
EF08HS
○ ○
2/4mm 8mm 3.5mm or less
0603～
EF08HD
○ ○ 2/4mm 8mm×2 3.5mm or less 0603～
EF12FS
－ ○
4/8/12mm
12mm
12.5 mm or less
(17mm or less)
EF16FS
－
○
4/8/12/16mm
16mm
EF24FS
－
○
4/8/12/16/20/24mm
24mm
EF32FS
－ ○
4/8/12/16/20/24/28/
32mm
32mm
12.5 mm or less
(26mm or less)
EF44FS
－ ○
4/8/12/16/20/24/
28/32/36/40/44mm
44mm
EF56FS
－ ○
4/8/12/16/20/24/28/32/
36/40/44/48/52/56mm
56mm
* Use components with specifications that conform to JIS C0806-3: 1999, IEC 60286-3:2007.
* RFID compliance is necessary when you use production control system.
* Up to 12.5 mm is supported as the depth of an embossed section of a component.
(2) Common specifications
(3) Option
① Tape cutting jig (A type, B type)
A positional adjustment between the tape feeder under production and the tape feeder
to be connected can be accurately and quickly made by cutting the tape with dedicated
scissors at connection of tape.
A type : Feeding pitch 4,12,20,28,36,44,52
B type : Feeding pitch 8,16,24,32,40,48,56
② Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
③ RFID tag attachment kit
By attaching a RFID tag on a ETF feeder currently used, you can manage the feeders
with production management system.
EF08HS
EF02HS
EF08HD EF12FS
EF16FS
EF24FS
EF32FS
EF44FS
EF56FS
Power
supply
Voltage DC24V
Maximum
allowable
current
1.8A 2.1A 1.8A
Stand by
current
130mA
Dimensions (mm)
L=660mm
H=335mm
L=911mm
H=455mm
L=700mm
H=335mm
Mass (kg)
2.5kg
3.0kg
3.0kg
3.5kg
4.0kg
4.5kg
Component feeding
system
Electrical motor drive system