FX-3RA_SPE_EN.pdf - 第35页
- 31 - ( 2) Common specifications 8 mm 12 mm/16 m m 24 m m 1 Dim ens ion s L=645 mm, H=213 mm W =16. 8 mm L=693 mm, H=472 mm W =31. 5 mm L=693 mm, H=472 mm W =40 m m 2 Mass (Ex c luding a r eel) 1.8 kg or less 2.45 kg or…
- 30 -
6-3-2 ATF
For splicing of component feed tape (tape splicing), this tape feeder permits a component
feed during production.
(1) Specifications
① 8 mm
Product
code
Tape type
Feeding
pitch
Number of
positioning pins
Diameter
of a reel
Typical component
type
Paper
Embossed
AQ02HP
See Note 1
○
－ 2 mm
Two
φ180 mm
0402 only
AF05HP
○
－
2 mm
1005
AF08HE
－
○
Two-terminal diode
AF081P
○
－
4 mm
1608, 2012, 3216
AF081E
－
○
SOT
AN05HP
○
－
2 mm
One
1005
AN08HE
－
○
Two-terminal diode
AN081P
○
－
4 mm
1608, 2012, 3216
AN081E
－
○
SOT
Note1: This tape feeder does not support splicing.
* For a tape feeder designed for both paper and embossed paper, contact our sales
representative.
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
② 12 mm to 24 mm
Product code Feed pitch
Pick position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss depth
AF121S
4 mm
132 mm
8.3 mm or less
17 mm or less
AF122S
8 mm
AF123S
12 mm
AF12FS
4/8/12 mm
AF12NS
4/8/12 mm
AF161S
4 mm
12.2 mm or less
AF162S
8 mm
AF163S
12 mm
AF16FS
4/8/12/16 mm
AF16NS
4/8/12 mm
AF242S
8 mm
20.2 mm or less
AF243S
12 mm
AF244S
16 mm
AF245S
20 mm
AF246S
24 mm
AF24FS
8/12/16/20/24
mm
AF24NS
8/12 mm
AF24FS-OP
8/12/16/20/24
mm
114 mm
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
- 31 -
(2) Common specifications
8 mm 12 mm/16 mm 24 mm
1 Dimensions L=645 mm,
H=213 mm
W=16.8 mm
L=693 mm,
H=472 mm
W=31.5 mm
L=693 mm,
H=472 mm
W=40 mm
2
Mass (Excluding a reel) 1.8 kg or less 2.45 kg or less 2.6 kg or less
3 Component transport method Ratchet drive system
(3) Options
① Bar code tag (8 mm only)
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be read
easily.
② Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss component
made of a soft and fragile material, this spacer is installed in the emboss groove of the
feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24 mm
feeder are available.
③ Joint tape splicing jig (8 mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape with
glue easily.
④ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
⑤ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
・Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
・Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).
⑥ RFID tag attachment kit
By attaching a RFID tag on a ATF feeder currently used, you can manage the feeders
with production management system.
- 32 -
6-3-3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, and 24 mm)
Product code Feed pitch
Pick position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss depth
FF121S
4mm
132mm
8.3mm or less
6.5mm or less
FF122S
8mm
FF123S
12mm
FF12FS
4/8/12mm
FF12NS
4/8/12mm
FF161S
4mm
12.2mm or less
FF162S
8mm
FF163S
12mm
FF16FS
4/8/12mm
FF16NS
4/8/12mm
FF242S
8mm
20.2mm or less 10.5mm or less
FF243S
12mm
FF244S
16mm
FF245S
20mm
FF246S
24mm
FF24FS
8/12/16/20/24mm
FF24NS
8/12mm
Dimensions
FF12**
L =693mm , H =472mm , W=31.5mm
FF16**
L =693mm , H =472mm , W=31.5mm
FF24**
L =693mm , H =472mm , W=40.0mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg
Component transport
method
Ratchet drive system
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.