FX-3RA_SPE_EN.pdf - 第47页
- 43 - 10. RELI A BILITY SPEC IFIC A TIONS 10 - 1. Li feti m e of de vi ces For five (5) years: Excluding either the consu mable components or t he following regularly replaceable components. Refer to t he Instruction Ma…
- 42 -
9. SAFETY SPECIFICATIONS
9-1. Standard Specifications
Emergency stop
Two (2) emergency stop buttons are installed on the machine each at the front and rear sides.
(The one (1) emergency stop button is provided when the optional HOD is attached on the
machine.) Depressing these emergency stop buttons immediately stops each axis to cut off
the power supply for driving the motors.
Safety covers
The machine is provided with covers, on the front and rear sides, for both of which the cover
open switch detects either status of opening or closing to suspend the continuous operation
temporarily upon opening either cover or both. Starting the operation as either cover or both
remains at opened, results in a status of low speed operation. Keeping either cover or both
opened results in nullifying both the START and SERVO FREE keys on the operation panel at
the opposite side.
9-2. CE marking specifications
(for EN machine)
This shall comply with the following EC (European Committee) instructions
− EC Machinery Directive ： 2006/42/EC
− EC EMC Directive ： 2014/30/EU
Applicable standard
Machinery Directive :
EN ISO12100-1:2003, EN ISO12100-2:2003, EN ISO14121-1:2007,
EN ISO13849-1:2008, EN 60204-1:2006, others
EMC Directive：
EN61000-6-4:2007, EN55016-1-2:2004/A1:2005/A2:2006,
EN55016-2-1:2004/A1:2005, EN55016-2-3:2006, EN 61000-6-2:2005,
EN61000-4-2:2009, EN61000-4-3:2006/A1:2008, EN 61000-4-4:2004,
EN61000-4-5:2006, EN61000-4-6:2009, EN61000-4-8:1993/A1：2001
- 43 -
10. RELIABILITY SPECIFICATIONS
10-1. Lifetime of devices
For five (5) years: Excluding either the consumable components or the following regularly
replaceable components.
Refer to the Instruction Manual for the details of consumable components.
− Periodic replacement parts: These must be replaced at intervals of 2 to 3 years as
standard. (The replacement interval varies depending on the operating conditions.)
- Cableveyor - Bear cable assembly
- Air tube
- Solenoid valve
- HOD assembly
- Exhaust filter
- Gas spring
- Filter element
- Battery unit
- Electric feeder IF cable assembly
- Optical fiber cable
- 1394 robot cable assembly
- Tape cutter for electric feeder
- Y-axis roller lubrication component
Criteria for calculating the lifetime:
22 hours per day
300 days per year
Therefore, 22 x 300 x 5 = 33,000 hours/5-years
◆
Revision record
Rev. Date Revised locations Revision contents Remarks
00 Nov. 2012 First edition
01 Dec. 2012 P42 EC EMC Directive Revision
02 May. 2017 Completely revised Support to JaNets. Revision
03 Jul. 2017 Completely revised JaNets Revision