FX-3RA_SPE_EN.pdf - 第36页
- 32 - 6-3-3 FTF/FTFR ( 1) Specification t abl e ① FT F (12 mm, 16 mm, and 24 mm) Product code Feed pitch Pick position (Y directi on) Applicable component emboss wid th Applicable component emboss depth FF121S 4m m 132m…
- 31 -
(2) Common specifications
8 mm 12 mm/16 mm 24 mm
1 Dimensions L=645 mm,
H=213 mm
W=16.8 mm
L=693 mm,
H=472 mm
W=31.5 mm
L=693 mm,
H=472 mm
W=40 mm
2
Mass (Excluding a reel) 1.8 kg or less 2.45 kg or less 2.6 kg or less
3 Component transport method Ratchet drive system
(3) Options
① Bar code tag (8 mm only)
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be read
easily.
② Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss component
made of a soft and fragile material, this spacer is installed in the emboss groove of the
feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24 mm
feeder are available.
③ Joint tape splicing jig (8 mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape with
glue easily.
④ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
⑤ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
・Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
・Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).
⑥ RFID tag attachment kit
By attaching a RFID tag on a ATF feeder currently used, you can manage the feeders
with production management system.
- 32 -
6-3-3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, and 24 mm)
Product code Feed pitch
Pick position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss depth
FF121S
4mm
132mm
8.3mm or less
6.5mm or less
FF122S
8mm
FF123S
12mm
FF12FS
4/8/12mm
FF12NS
4/8/12mm
FF161S
4mm
12.2mm or less
FF162S
8mm
FF163S
12mm
FF16FS
4/8/12mm
FF16NS
4/8/12mm
FF242S
8mm
20.2mm or less 10.5mm or less
FF243S
12mm
FF244S
16mm
FF245S
20mm
FF246S
24mm
FF24FS
8/12/16/20/24mm
FF24NS
8/12mm
Dimensions
FF12**
L =693mm , H =472mm , W=31.5mm
FF16**
L =693mm , H =472mm , W=31.5mm
FF24**
L =693mm , H =472mm , W=40.0mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg
Component transport
method
Ratchet drive system
* For the component size or tape specifications, follow the JIS
C0806-3:1999
，
IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system.
- 33 -
② FTFR (32 mm, 44 mm, and 56 mm)
Product code Feed pitch
Pick
position
(Y direction)
Applicable
component
emboss width
Applicable
component
emboss
depth
FF323R 12 mm
132 mm
23.5 mm or less
25 mm or
less
FF324R
16 mm
FF32FR 8/12/16/20/24 mm
FF32FR-OP 8/12/16/20/24/28/32 mm 114 mm
FF443R
12 mm
128 mm
33.8 mm or less
FF444R 16 mm
FF44FR 8/12/16/20/24 mm
FF44FR-OP 8/12/16/20/24/28/32/36/40/44 mm 114 mm
FF564R 12/16 mm 128 mm
46.0 mm or less
FF568R 12/16/20/24/28/32 mm 114 mm
FF56FR 8/12/16/20/24 mm 128 mm
FF56FR-OP 8/12/16/20/24/28/32/36/40/44/48/56 mm 114 mm
Dimensions
L =693 mm, H =472 mm
W= FTFR32**:47.7 mm, FTFR44**:61.6 mm, FTFR56**:66.0 mm
Mass
(Excluding a
reel)
FTFR32**:3.2 kg, FTFR44**:3.5 kg, FTFR56**:3.8 kg
Component
transport
method
Ratchet drive system
* For the component size or tape specifications, follow the JIS C0806-3:1999, IEC
60286-3:2007.
* RFID compliance is necessary when you use production control system. .
(2) Options
① Emboss spacer (FTFR only)
When the component width and length are large and the tape depth is small, the posture
stability at component pickup can be improved by placing the spacer at the component
pickup position of the tape feeder.
The usable emboss depth is 1.0 mm to 8.0 mm.
② RFID tag attachment kit
By attaching a RFID tag on a FTF/FTFR feeder currently used, you can manage the
feeders with production management system.
* RFID tag cannot be attached on the old type of the FTF feeder.
For further advice, contact JUKI or the representative office in your area.