ACT - Accuracy Check Tool.pdf - 第148页

ACT with SSW 7xx / User Manual 07/2017 Edition 40 4.1.3 Creating a Setup (Assigning Tables) ► Copy an existing setu p of your line. ► Rep lace the table s by using the prepar ed tables for A CT that you have already impo…

ACT with SSW 7xx / User Manual 07/2017 Edition

Twin Head – statistical reliability:

NOTICE

► When measuring a Twin Head, pay attention to the number of placed components

per segment to ensure the statistical reliability of the measurement result.

At least 20 components per segment should be placed!

With the setup of the tray with the glass components, pickup problems may occur for some

machine types because the components cannot be reached.

► Pay attention to the tray position on the component table or in the WPC.

Variants:

► By positioning the tray on the BE table, ensure that the components can be reached in X-

direction from both segments.

As soon as the two front rows are empty:

► Stop the machine.

► Refill the components at the front.

► Set the filling level to Full again.

This also applies for the tray setup in the WPC. The components have to be refilled in the WPC

too (e.g. WPC at the SX1/2 machine) to ensure that a sufficient number of components can be

picked up by both Twin segments.

► Possibly use the Tray in Conveyor for ACT option. This ensures the accessibility in Y-

direction.

► In order to further increase the statistical reliability of the measurement result and at the same

time ensure that each segment fulfills these requirements, you can check each segment

individually.

► To do this, omit one segment at a time in the Nozzle Configuration tab of the Setup Editor

in SIPLACE Pro, so that only one segment places all 48 components.

Figure 4-10: Omitting a segment

ACT with SSW 7xx / User Manual 07/2017 Edition

4.1.3 Creating a Setup (Assigning Tables)

► Copy an existing setup of your line.

► Replace the tables by using the prepared tables for ACT that you have already imported.(see

section 3.2.6).

Tables are available for any machine.

Key:

(1) S-tables with setup (4) X-tables with setup

(2) Empty S-tables (5) Empty X-tables

(3) TC = Tray Changer (WPC/MTC)

ACT with SSW 7xx / User Manual 07/2017 Edition

Available S-tables:

Available X-tables:

Available tables (setups) for WPC/MTC: