ACT - Accuracy Check Tool.pdf - 第163页
ACT with SSW 7xx / User Manual 07/2017 Edition 55 4.2.5 Working with the ACT under Station Softw are 703.xx to 708.xx NOTICE It is not necessary to instal l any addition al software on t he station computer o n machines …
ACT with SSW 7xx / User Manual 07/2017 Edition
54
Figure 4-28: Conveyor interface window
► Select LP einfahren (Loading PCB).
► Click OK.
If this is not the placement station on which the ACT is to be performed, the plate is automatically
passed through the machine, since there is no specification by SIPLACE Pro for components to be
placed.
If no components are to be placed on the next machine either, the plate is automatically passed
through this machine, too.
On the station being in ACT mode and for which a corresponding specification for components to
be placed is available, the plate is stopped and gets placed automatically in the placement area,
see section 4.2.5.
Then the measurement is started automatically.
ACT with SSW 7xx / User Manual 07/2017 Edition
55
4.2.5 Working with the ACT under Station Software 703.xx to 708.xx
NOTICE
It is not
necessary to install any additional software on the station computer on machines
running version 703.xx and higher of the station software.
Requirements:
● You have already sent a placement/measurement program to the station as described in
section 4.1.
● You have set up the station as described in section 4.2.1.
Figure 4-29: Switching the user level
► Switch to the Einstellungen (Settings) view (1).
► Switch to Benutzereinstellungen (User settings) (2).
► Switch to the Service (Kunde) (Machine service) user level (3).
► Enter the service password.
ACT with SSW 7xx / User Manual 07/2017 Edition
56
Figure 4-30: Service Tools view
► Change to the Service view (1).
► Click the Accuracy Check button (2).
Figure 4-31: Preparing for the accuracy check
► Now click the Prepare for accuracy check button (1).
The machine automatically switches to standalone mode.