00195440-05-SG_D-Series_FSE-EN.pdf - 第110页
6 Reference Run 6.3 Room for Your Sketches and Notes 6.2.4 Height Reference Run 110 Student Guide SIPLACE D-Series (FSE)
6 Reference Run
6.2.4 Height Reference Run 6.3 Room for Your Sketches and Notes
Student Guide SIPLACE D-Series (FSE) 109
6 Reference Run
6.3 Room for Your Sketches and Notes 6.2.4 Height Reference Run
110 Student Guide SIPLACE D-Series (FSE)
7 Axis Dynamics
7.1 Axis Dynamic Basics
Student Guide SIPLACE D-Series (FSE) 111
7
7 Axis Dynamics
Axis Dynamics
7.1
7.1 Axis Dynamic Basics
Axis Dynamic Basics
Each axis starts from a position with acceleration a constant speed phase and deceleration should move
the axis into a target position. The dynamic movement of the axis on the SIPLACE machine is regulated
by a digital control system. A powerful digital processor in the A364 axis controller permanently adjusts
the axis dynamic to the current axis state.
This means, that all adjustments for speed (Tacho) and positioning quality (P-gain) on the servo amplifier
are removed. The control signals are different for this new axis control principle.