00195440-05-SG_D-Series_FSE-EN.pdf - 第148页
9 C&P Placement Heads 9.1 Overview 9.1.4 C&P Head Placement Construction 148 Student Guide SIPLACE D-Series (FSE) 9.1.4.2 9 . 1 . 4 . 2 P la c e m e n t H e a d D if f e r e n c e s B e t w e e n D L M 2 / 1 a n …
9 C&P Placement Heads
9.1.4 C&P Head Placement Construction 9.1 Overview
Student Guide SIPLACE D-Series (FSE) 147
9.1.4
9.1.4 C&P Head Placement Construction
C&P Head Placement Construction
9.1.4.1
9.1.4.1 Hardware - new features for C&P head
Hardware - new features for C&P head
The D4/D4i does not have a Head Modularity function, as this machine is designed to succeed the HS,
as a fast placement machine for small components.
The placement heads on the D/Di-series have the following common/different features:
Hardware - new features for C&P head
C&P12 head
Legend - overview of parts 2
1. Forced air unit with electromagnetic valve (version 02
– backwards compatibility)
[00367793-xx]
2. Silencer
[03003134-xx]
3. Turning station
[00341780-xx]
4. Component camera 18x18
[03014449-xx]
Component camera 27x27(sst29)
[03018637-xx]
Component camera 27x27(sst30)
[03085394-xx] (for Di-series)
5. Compressed air connection for forced air unit
6. Compressed air supply for vacuum generator (hold
circuit and pickup/place)
7. Vacuum measuring board (under the cover)
C&P12 head
Legend - overview of parts 3
1. Star, Fitted
2. "Z axis down" sensor
3. RSF digital encoder 12/DLM2
4. Circular arc guide (raceway), aligned to star drive
axis
5. Star drive axis, centered by head housing and Z axis
claw
Assembly D4/D4i D3 D2/D2i D1/D1i
C&P head types C&P12 C&P12 or 6 C&P12 or 6 C&P12 or 6
Star drive ‚C28’
03031187-01
New bearings / strengthened motor shaft / green heat-shrinkable sleeve for star
axis incremental encoder cable
Forced air unit 00367793-02 Neue Version 02: with date printed on the e-valve
9 C&P Placement Heads
9.1 Overview 9.1.4 C&P Head Placement Construction
148 Student Guide SIPLACE D-Series (FSE)
9.1.4.2
9.1.4.2 Placement Head Differences Between DLM 2/1 and DLM3
Placement Head Differences Between DLM 2/1 and DLM3
Placement Head Differences Between DLM 2/1 and DLM3
9.1.4.3
9.1.4.3 Kamera-Modularität
Kamera-Modularität
Camera equipment for C&P head options
DP station 00341780-05 version 5, downwards compatibility
Valve positioning
drives
Version 02
Requirements Minimum 601.03 SP1 or A364 axis controller (for Di must be 605.03 SP2)
Head modularity No Same as X ma-
chines
Reconfig. set
C&P12 head
00119860-01
Reconfig. set C&P6
head 00119861-01
Special features Component sensor fasteners for C&P12 with 130Ncm
Neuer Pinolenras-
tring
(verfügbar ab ...2008) (Nachrüstung für ältere Bestückkopftypen nur durch Ser-
vice)
Version 6 der
DP-Station
(verfügbar ab ca. Juni 2008)
Version 03 der Bla-
slufteinheit
(verfügbar ab ca. Juni 2008)
Assembly D4/D4i D3 D2/D2i D1/D1i
Assembly DLM 1/2 DLM 3
C&P head type C&P12 und 6 C&P12 or 6
Bestücksternantrie
b ‚C28’ [03031187-
01]
Neue Lagerung / stärkere Motorwelle /
grüner Schrumpfschlauch an der Inkre-
mental-Encoderleitung Sternachse Neue
Maschinen-Daten
Placement star
drive ‚C29’
Compatible fitting for DLM1 and 2
Blaslufteinheit
Version 02
Downwards compatibility YES
Blaslufteinheit Ver-
sion 03
Downwards compatibility
(verfügbar ab ca. 06/2008)
Downwards compatibility
(verfügbar ab ca. 06/2008)
DP station [00341780-05] (Version 5), wird abgelöst durch
Version 6 (verfљbar ab ca. 06/2008) (abwärtskompatibel)
Valve positioning
drive
Version with original cam disk DLM1 /
new cam disk DLM2
DLM2 cam disk and version 2
Requirements Minimum SC/MC 601.03 SP1 or A364
axis controller
Special features Befestigung BE-Sensor C&P12 mit 130 Ncm
Camera D4/D4i
with C&P12
D3
with C&P12
D2/D2i
with C&P12
D1/D1i
with C&P12
Standard C&P12 SST28
Als hochauflösende Version SST29 (SST30 for Di-series)
C&P12 mit extremhochauflösender
Kamera für 0402 mm (01005)
SST38 (SST30 for
Di-series)
--- SST38 (SST30 for
Di-series)
Standard C&P6 --- SST29 (SST30 for Di-series)
9 C&P Placement Heads
9.1.4 C&P Head Placement Construction 9.1 Overview
Student Guide SIPLACE D-Series (FSE) 149
9.1.4.4
9.1.4.4 Focus Level of C&P Component Camera
Focus Level of C&P Component Camera
9.1.4.5
9.1.4.5 Nozzle Changer Features
Nozzle Changer Features
PPW-Ausrüstungen C&P12-Bestückkopf
PPW-Ausrüstungen C&P6-Bestückkopf
The digital component camera has a pixel size correction
function in case the calculated component level deviates
too greatly from the theoretical focus level.
If the “placement head radius (1) plus nozzle length plus
component height“ data deviates from the theoretical fo-
cus level (2), an appropriate correction pixel size factor is
derived from this.
In der Pipettenprogrammierübersicht bekommen Sie zu
den einzelnen Typen einen Höhenwert als Anhaltspunkt,
den Sie so auch für die Kameras mit ICOS-System
übernehmen können.
Features for C&P12 D4/D4i D3 D2/D2i D1/D1i
Number of NC carriers per gan-
try
1 HS compati-
ble
2 X compatible 1 new 1 new
Anzahl der Magazine pro Träger5555
Supply pressure 5 bar 2.5 bar 2.5 bar 2.5 bar
Features for C&P6 head D4/D4i D3 D2/D2i D1/D1i
Number of NC carriers per gan-
try
--- 2 X compatible 1 new 1 new
Anzahl der Magazine pro Träger --- 6 6 6
Length of NC carrier (outer edg-
es)
475 mm 450 mm 565 mm 565 mm