00195440-05-SG_D-Series_FSE-EN.pdf - 第35页
3 Overview 3.4.3 Axis Unit and Computer Unit 3.4 Assemblies Student Guide SIPLACE D-Series (FSE) 35 Axis Controller Boards Axis controller boards Legend 1. Axis controller board in PA1 : D2/D2i gantry 1/2 2. Axis control…
3 Overview
3.4 Assemblies 3.4.3 Axis Unit and Computer Unit
34 Student Guide SIPLACE D-Series (FSE)
3.4.3.4
3.4.3.4 Axis Unit
Axis Unit
The axis unit contains the servo boards, axis controller boards, power supply (+/-15V,+5V) and the bal-
last circuit (only in axis unit 2). The flexible axis unit is equipped with the correct servo and axis boards
for the machine type and head configuration concerned (with C&P12).
Overview of axis unit
D4/D4i machine: axis unit in PA1 for gantry 1 and 4, axis units and in PA2 for gantries 2 and 3
Axis Unit SIPLACE D4/D4i
Servo Positions D4/D4i/D2/D2i
Servo assignment D4/D4i/D2/D2i
Axis Unit
The axis unit is located near the PCB input or output.
NOTICE! The two power pack assemblies have
a different version from 01/2007 and replace the assem-
blies shown.
Servo positions for
each level
D4/D4i D2/D2i
C&P type
PA1
C&P type
PA2
C&P type P&P type (next
generation)
x Gantry 1 Gantry 2 Gantry 1 Gantry 1
A9 Star 1 Star 2 Star 1 Z-axis 1
A11 Z-axis 1 Z-axis 2 Z-axis 1 --
Y Gantry 1 Gantry 2 Gantry 1 Gantry 1
A13 -- -- -- D axis 1
A15 -- -- -- --
x Gantry 4 Gantry 3 Gantry 2 Gantry 2
3 Overview
3.4.3 Axis Unit and Computer Unit 3.4 Assemblies
Student Guide SIPLACE D-Series (FSE) 35
Axis Controller Boards
Axis controller boards
Legend
1. Axis controller board in PA1: D2/D2i gantry 1/2
2. Axis controller board in PA2: D3 without gantry 2, often with TWIN ACs at position 2/3
A10 Star 4 Star 3 Star 2 Z-axis 2
A12 Z-axis 4 Z-axis 3 Z-axis 2 --
Y Gantry 4 Gantry 3 Gantry 2 Gantry 2
A14 DP axis G1 DP axis G2 DP axis G1 D axis 2
A16 DP axis G4 DP axis G3 DP axis G2 --
Servo positions for
each level
D4/D4i D2/D2i
C&P type
PA1
C&P type
PA2
C&P type P&P type (next
generation)
3 Overview
3.4 Assemblies 3.4.4 Pneumatic Unit
36 Student Guide SIPLACE D-Series (FSE)
Axis Board A364
D4/D4i axis board
3.4.4
3.4.4 Pneumatic Unit
Pneumatic Unit
The pneumatic unit is a fixed installation inside the machine and is located to the right of the middle sec-
tion of the machine, behind a flap. The pneumatic unit includes all electrical connections for control/reg-
ulation of the compressed air supply.
3.4.4.1
3.4.4.1 D1/D1i/D2/D2i Pneumatic Unit
D1/D1i/D2/D2i Pneumatic Unit
D1/D1i/D2/D2i pneumatic unit
Legend
1. Pneumatic Unit
2. Coupling for compressed air connection
3. Main stop valve
The D1D1i//D2/D2i pneumatic unit is mounted on a com-
pact rack module and is located in the right-hand, middle
section of the machine. The unit is secured by a lockable
door and contains the complete compressed air supply.
In D3 machines, this unit also contains the SMEMA inter-
face (Siemens) to the upstream and downstream sta-
tions.